1JZ-GTE no aircon - serpentine belt size?

[cptsideways]

Just deleted the aircon on my JZ20 & wondered what folks had done for belts now there is no pump there? What size or other patterns fit?

[big wad]

just get a long 14mm spanner and pull the weight down on the tensioner and hold it in place with a wire tie then just run the tape measure around the pulleys and add 10mm and you will be right on the money . the belts are available from your local eng shop in 5mm incriments. cheers bigwad

[mrshin]

Can't remember what I used, but it was an easy enough to get size.

[Ribfeast]

6PK1875 I think was the one I used. Or 6PK1865.

If you use the 6PK1900 it ends up like this:



The marker should line up in the middle.