MA61 Part Numbers & General Infomation

[GA61XX]

Just FYI.

I recently bought the green bush (twas not green too), and it was about 8mm thicker than it needed to be.
It actually pressed up against those 2 little pivot pins.

I pulled it out and ground off about 8mm of plastic.
Fit perfectly after that.

I bought the green bush this week.. & green on top & black ring on lower part...
Seat MTM LVRLN46811(W58 shifter lower seat bush) 33505-35020 $19.50

[CrUZida]

Is it like 15mm thick, or 8mm thick?

[GA61XX]

Just FYI.

I recently bought the green bush (twas not green too), and it was about 8mm thicker than it needed to be.
It actually pressed up against those 2 little pivot pins.

I pulled it out and ground off about 8mm of plastic.
Fit perfectly after that.

It's ment to sit up against the bottom of the pins..
If you ground it then will be no good..

[CrUZida]

Have you fit it yet?
I've bought probably 4 or 5 of these in the past few years, and none of them have been like the one I just bought.

It does not sit up against the pins. I was unable to insert the shifter correctly with the bush unmodified, and even with the shifter forced down hard I was unable to select any gears.

Ground the bush thinner and now its perfect.
Tight shifter with no slop.

[triptek]

Have you fit it yet?
I've bought probably 4 or 5 of these in the past few years, and none of them have been like the one I just bought.

It does not sit up against the pins. I was unable to insert the shifter correctly with the bush unmodified, and even with the shifter forced down hard I was unable to select any gears.

Ground the bush thinner and now its perfect.
Tight shifter with no slop.

I had the same problem on my r154. Like ya said, i just cut away some of the bush.

[Negative Boost]

Havn't had a problem with any of my green bushes. Bit random hey.

[ill-minded]

didn't have any problems with the ones that i changed either.. this is all that was left of the old ones when i pulled them out though

[GA61XX]

Have you fit it yet?

Yes we fitted the parts to the gear box..
We did this in the car park at the Toyota shop.. 5min. job....

Green bush just slipped in & white one clicked on...

cheers

[CrUZida]

Something wierd is going on here Scooby

But as I said, mine was all black (previous ones have been green), so maybe either they have replaced the green one with a new bush, or I was given the wrong part (can't find the paperwork that came with it to check part number, but I ordered the correct one)

[GA61XX]

Toyota shop here had them on the shelf....
I had an old stick & upper part of the box, as samples, so i got the right one...
I was told by toyota man at shop that was 2 diff' ones....

But the bush i fitted the other day is very diff' to the one in my XX.. as it is White Nylon & pins go through the upper 1/2 of it...

cheers

[GA61XX]

Head lamp protector... this is the rubber strip in front of the light on the nose cone....

part numbers :-

Left hand side... 54126 - 14011 .. $128.oo
Right hand side... 54125 - 14011 .. $128.oo

Clips ( 4 per side )... 90467 - 07023 .. $ ??

Nil stock in Aus.

[CrUZida]

Jeebers thats pricey for somethng so small.
Thank fuck mine are in perfect nick.

[GA61XX]

Jeebers thats pricey for somethng so small.
Thank fuck mine are in perfect nick.

The price of many Toyota parts comes down to the old "wholesale sales tax" pre GST.. this old tax was added every year.....
So a part that cost $15.oo in '80 has tax added every year till date sold.. eg. same part sold '95 = $50.oo aprox...
With GST $15.oo + 10% = $16.5o This tax is added at time of sale..

[82MKII]

Head lamp protector... this is the rubber strip in front of the light on the nose cone....

part numbers :-

Left hand side... 54126 - 14011 .. $128.oo
Right hand side... 54125 - 14011 .. $128.oo

Clips ( 4 per side )... 90467 - 07023 .. $ ??

Nil stock in Aus.

Forget getting them new.
The only way to get a decent set of these is via ebay. I got some from Canada (they don't have as much sun up there as we do!!).

Regards

Peter

[GA61XX]

Power steering rack kit..

P/S pump... # 04446-22010... $62.oo
P/S rack master kit... # 04445-24012... $158.oo.. boots extra..

Yes there is stock in Aus...

rack master kit includes, the control valve overhaul kit....