Hi Toymods
I just finished swapping the sunroof over on my 1998 model Toyota Caldina and it seems to all be working fine, but the issue I have at the moment is with the closing position when you close the sunroof after you've slid it into the sunroof, the drivers corner isn't sitting flush against the roof (slightly lower)

The strange thing is, when tilting up and then down again the sunroof sits perfectly flush against the roof, its only when using the slider.

I read something about reinitialising the sunroof so it relearns the limit by holding down the tilt up button but I couldn't get it to go into this mode.

Was wondering if anyone could shed some light. I would really love to get it working just right.

Thanks