1JZ auto swap - T5 ecu connector help

[Hzkgrceprjkt]

Hey guys, new fellow here hailing in from toronto, canada. Im in the midst of a JZX90 1JZ auto swap into my 1990 MX83 cressida. Ive got all the wiring sorted out except for a few pins im stuck on for the MX83 T5 ecu plug. I hacked up the old 7M ecu to obtain the female end of the T5 ecu plug, created a jumper harness to the 1JZ ecu and got most of the pins traced, but im stuck on pins on the T5 connector: number 15(M ECT pattern switch), 22(NSW), 11(STA), and 8(SP2).

Now Ive got a JZX90 AUTO harness and im eliminating cruise and A/C but keeping the car automatic. What wires on the JZX90 harness connects to the pins that I had just posted above? Ive searched quite a bit but couldnt find exactly what I was looking for,its just these pins im kinda stumped on. Any input would be greatly appreciated. Ive used these two links for reference:

http://members.shaw.ca/boltz/7MGTE-M...ness_Plugs.htm

http://wilbo666.pbworks.com/w/page/4...JZZ30%20Soarer

[Hzkgrceprjkt]

Any help would be appreciated. Anyone?