MX83 Idle Air Control Valve

[smellyhippy]

Ok, my MA61 is almost back together, last thing is the hoses for the idle air control valve, I think it's called. It has two bigger hoses, one from intake manifold, one from the intake pipe, as well as two smaller ones that look like they may have had coolant in them. Just wondering where the hoses to these spots come from? I've found one, but the other I can't see where it would have come from. I will get a picture of it later to show what I mean if it helps.

Edit: The engine is a 7M-GE out of an MX83 Cressida

[thechuckster]

i wouldn't bother with the coolant hoses unless you drive in cold weather (e.g. snow).

[amichie]

Ok, my MA61 is almost back together, last thing is the hoses for the idle air control valve, I think it's called. It has two bigger hoses, one from intake manifold, one from the intake pipe, as well as two smaller ones that look like they may have had coolant in them. Just wondering where the hoses to these spots come from? I've found one, but the other I can't see where it would have come from. I will get a picture of it later to show what I mean if it helps.

Edit: The engine is a 7M-GE out of an MX83 Cressida

One hose comes from under the intake manifold. The other goes to the throttle body.

[smellyhippy]

Thanks a lot, does it matter which way around they go?