Page 7 of 8 FirstFirst ... 5678 LastLast
Results 91 to 105 of 118

Thread: Pulley Fabricators(now with pic)

  1. #91
    Gary Motorsport Inc. Too Much Toyota takai's Avatar
    Join Date
    Oct 2005
    Location
    Victoria
    Posts
    5,543

    Default Re: Pulley Fabricators(now with pic)

    You got that in the mail?
    Which one is the water pump? I assume it is the bottom one?
    -Chris | Garage takai - Breaking cars since 1998
    Sparky - AE86 IPRA Racer | RZN149 Hilux - Parts and Car Hauler
    I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence

  2. #92
    I <3 Vito Conversion King RiceburnaGTV's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    2,177

    Default Re: Pulley Fabricators(now with pic)

    Quote Originally Posted by takai
    You got that in the mail?
    Which one is the water pump? I assume it is the bottom one?
    Naa thats the one at rare spares...yep the one with 9 holes is water pump...going in to measure the water pump bolts now..
    -Just Alloy Radiators-
    www.alloyradiators.com.au

  3. #93
    Gary Motorsport Inc. Too Much Toyota takai's Avatar
    Join Date
    Oct 2005
    Location
    Victoria
    Posts
    5,543

    Default Re: Pulley Fabricators(now with pic)

    Ok, and the cost of that setup?
    -Chris | Garage takai - Breaking cars since 1998
    Sparky - AE86 IPRA Racer | RZN149 Hilux - Parts and Car Hauler
    I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence

  4. #94
    I <3 Vito Conversion King RiceburnaGTV's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    2,177

    Default Re: Pulley Fabricators(now with pic)

    $275 minus belt,belt $60 extra but the one on ebay is $150 inc belt...I have already bid on it hopefully he doesnt bid on his own auctions and it stays 150 and 20 shipping

    Ok just measured the water pump bolts and from center to center they are 40mm, 45mm outside of the bolt to the outside of the other,so it looks like we will have to make up some sort of adapter for that aswell..anyone got a spare 3t lying around to see how this crank pulley comes off??
    -Just Alloy Radiators-
    www.alloyradiators.com.au

  5. #95
    Gary Motorsport Inc. Too Much Toyota takai's Avatar
    Join Date
    Oct 2005
    Location
    Victoria
    Posts
    5,543

    Default Re: Pulley Fabricators(now with pic)

    Ill go measure the 4A ones, i think they are a fair bit bigger than those ones

    57mm, with a 30mm center hole. Not much clearance back wards though, how thick is that pulley?
    -Chris | Garage takai - Breaking cars since 1998
    Sparky - AE86 IPRA Racer | RZN149 Hilux - Parts and Car Hauler
    I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence

  6. #96
    I <3 Vito Conversion King RiceburnaGTV's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    2,177

    Default Re: Pulley Fabricators(now with pic)

    Quote Originally Posted by takai
    Ill go measure the 4A ones, i think they are a fair bit bigger than those ones

    57mm, with a 30mm center hole. Not much clearance back wards though, how thick is that pulley?

    naa sorry thats not the diameter of the pulleys..

    57mm is diameter of the center hole of the crank pulley,the total diameter is 115mm,105mm for the water pump and 70 or 75mm for the alternator..

    cheers
    -Just Alloy Radiators-
    www.alloyradiators.com.au

  7. #97
    Gary Motorsport Inc. Too Much Toyota takai's Avatar
    Join Date
    Oct 2005
    Location
    Victoria
    Posts
    5,543

    Default Re: Pulley Fabricators(now with pic)

    Nah, that was dimensions of the bolt spacing on the 4A water pump pulley. Shoudl be able to machine out the center hole and adjust the boltspacing for that one quite easily.
    -Chris | Garage takai - Breaking cars since 1998
    Sparky - AE86 IPRA Racer | RZN149 Hilux - Parts and Car Hauler
    I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence

  8. #98
    I <3 Vito Conversion King RiceburnaGTV's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    2,177

    Default Re: Pulley Fabricators(now with pic)

    Cool,here is the measurements anyways
    -Just Alloy Radiators-
    www.alloyradiators.com.au

  9. #99
    Gary Motorsport Inc. Too Much Toyota takai's Avatar
    Join Date
    Oct 2005
    Location
    Victoria
    Posts
    5,543

    Default Re: Pulley Fabricators(now with pic)

    Diagonally?
    -Chris | Garage takai - Breaking cars since 1998
    Sparky - AE86 IPRA Racer | RZN149 Hilux - Parts and Car Hauler
    I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence

  10. #100
    Junior Member Too Much Toyota oldcorollas's Avatar
    Join Date
    Aug 2005
    Location
    sydney
    Posts
    12,496

    Default Re: Pulley Fabricators(now with pic)

    46xsqrt(2)
    prolly more like 62-63 from edge of holes tho..
    "I'm a Teaspoon, not a mechanic"
    "There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)

    AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!

  11. #101
    Gary Motorsport Inc. Too Much Toyota takai's Avatar
    Join Date
    Oct 2005
    Location
    Victoria
    Posts
    5,543

    Default Re: Pulley Fabricators(now with pic)

    Yeah, i was more thinking about the other set of holes. They look a whole lot more like high 50s.
    -Chris | Garage takai - Breaking cars since 1998
    Sparky - AE86 IPRA Racer | RZN149 Hilux - Parts and Car Hauler
    I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence

  12. #102
    I <3 Vito Conversion King RiceburnaGTV's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    2,177

    Default Re: Pulley Fabricators(now with pic)

    Quote Originally Posted by takai
    Yeah, i was more thinking about the other set of holes. They look a whole lot more like high 50s.
    Yeah sorry guys I should have been more thorough in my measurements,I actually had to ring him up to get those as i lost the bit of paper with all the measurements on it..hahaha those other holes in the water pump pulley definately look like speed holes to me...
    -Just Alloy Radiators-
    www.alloyradiators.com.au

  13. #103
    Gary Motorsport Inc. Too Much Toyota takai's Avatar
    Join Date
    Oct 2005
    Location
    Victoria
    Posts
    5,543

    Default Re: Pulley Fabricators(now with pic)

    Quote Originally Posted by RiceburnaGTV
    Yeah sorry guys I should have been more thorough in my measurements,I actually had to ring him up to get those as i lost the bit of paper with all the measurements on it..hahaha those other holes in the water pump pulley definately look like speed holes to me...
    Yeah, but with a bit of constructive filing the stock mounting set can become speed holes and the speed holes mounting holes.
    Alternator looks perfect though.
    -Chris | Garage takai - Breaking cars since 1998
    Sparky - AE86 IPRA Racer | RZN149 Hilux - Parts and Car Hauler
    I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence

  14. #104
    Estranged Member Chief Engine Builder mullett's Avatar
    Join Date
    Jan 2006
    Location
    WA
    Posts
    3,369

    Default Re: Pulley Fabricators(now with pic)

    How much can you afford to space them out? If you can get a 20mm spacer behind each pully, I can make it fit anything.

    RM.

    Edit: Come to think of it, with that much room to play with I might be able to get some sort of dampening system in the crank pulley....

  15. #105
    I <3 Vito Conversion King RiceburnaGTV's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    2,177

    Default Re: Pulley Fabricators(now with pic)

    Quote Originally Posted by mullett
    How much can you afford to space them out? If you can get a 20mm spacer behind each pully, I can make it fit anything.

    RM.

    Edit: Come to think of it, with that much room to play with I might be able to get some sort of dampening system in the crank pulley....
    mmmm 20mm might be pushing it.I know the small block ford one's crank pulley is spaced out that far.How will this help? Dampening system?
    -Just Alloy Radiators-
    www.alloyradiators.com.au

Similar Threads

  1. Stuck crank pulley bolt
    By Shifty in forum Tech and Conversions
    Replies: 34
    Last Post: 05-04-2006, 10:37 AM
  2. alternator pulley idler torque setting
    By SpleenieMcSpleen in forum Tech and Conversions
    Replies: 0
    Last Post: 25-03-2006, 12:19 PM
  3. 4ag crank pulley sizes
    By benjamin in forum Tech and Conversions
    Replies: 15
    Last Post: 08-02-2006, 07:27 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •