Weird plastic wrapped around ignition lead 1g-gte

[Lambolica]

Guys,

Please be serious... In the tech section. This is going too far.

Cheers
Simon

[Z2TT]

Hi,

It's the one coming from the coil. Oldcorolla's The lead doesn't have the plastic going all over it, just at the area that's show in the picture, it doesn't look like it could touch anything to answer your question. Only bit it could touch I'd say is the turbo pipe leading toward the intercooler, But there is no insulation on that area where it could touch, only on the area shown in the picture.

It's meant to stop you posting shit threads but it's obviously worn out and will require replacement.

I wonder if there's anything that will stop you posting shit posts?

It probably got broken when you hit the gutter street drifting.

If you had half a brain you'd know I have a z20 not an a70, and that picture is from an a70 like I said, which is not my car.

[timbosaurus]

If you had half a brain you'd know I have a z20 not an a70

Just a question... what's the size of his brain got to do with knowing what car you drive

[Cuzzo]

Probably was a bit harsh. Dont like threads, dont open or reply.

On that note can i suggest a lock?

+1 lock

[oldcorollas]

maybe deletion of non-relevant posts would help.
+2

[JZA70R_92]

funny that both my 1Gs the sprial wrap was No. 2 Lead

[Z2TT]

Well just checked, and Spiral wrap is definitely on the lead coming from the Coil.

[oldcorollas]

maybe it is on the wrong one

[Z2TT]

Looks like it must be, as GA70H_92 had both of his on No.2 Lead.
Should I swap it over or not worry about it?

[Officer Doofy]

OMG dude, can you please stop stealing the precious oxygen........

[Z2TT]

OMG dude, can you please stop stealing the precious oxygen........

Relax, there's heaps to go around.

[JZA70R_92]

is the car running fine no issues? if so leave it be!

[Z2TT]

Hi,

Yeah, might as well not worry about it.
Was just wondering why it was there, and only on one lead though.

Thanks.

[TERRA Operative]

Seriously, it's for abrasion resistance. Take it off, or leave it. It really is of no consequence.

I had the same stuff, but black on a heap of the rubber vac lines on my AE101 4AGZE. When I went to silicone hoses, I only replaced it where rubbing was likely to occur.

[skiddz]

maybe deletion of non-relevant thread would help.
+2

fixed

but more seriously, the scary thing is places like rolla club or boost cruising are full of oxygen theives creating similar threads about equally unimportant matters such as "how do i dose like tsutsutsu OMG f0oli sick brew" and "can i put a 1g into my 1989 corolla"