MX83 Cruise Control wiring...

[andrew_mx83]

so just cut the black/white and cruise will work no matter what gear the ecu thinks its in?

awesome

[indeecent]

Thats a good option for me!

Just finished the conversion and as you'd expect, i don't want to get back under the car to sort out wiring

[mrshin]

I did mine yesterday morning (only put the manual box in on the weekend), and it's great to have cruise again. I'm gonna have a go at putting a clutch switch on in the morning, if I get time.

[mrshin]

Fitted the clutch switch yesterday - just ordered another MX83 brake light switch (the two wire one) from Burson, screwed it in, works perfectly.

[takai]

Hm, just to bring this up again. Which way around is the input for the black/white wire. Does it go high (12v) or low (ground) when the car goes into neutral?

[madmont]

It would be earthed through rhe starter and you want it to be open circuit to engage

[takai]

Ok, nice and easy then.

For those listening at home who are confused, run black-white through a clutch switch to earth.