1JZ GTE 100K service

**SL666** · 24-02-2006, 10:50 PM

tensioner assy being timing belt tensioner...

how did you get away without a accessory belt tensioner?

**rogue-vl** · 25-02-2006, 10:00 AM

Here is a cheaper alternative for the idler pully, especially if you have the plastic type

Toyota plastic pulley & bearing
OD 96mm
ID 17mm (bearing)
width 26mm

Ford Windsor 5lt Part No EP060
OD 100mm
ID 17mm
width 30mm

The Ford Windor 5ltr pulley is metal and the bearing is easily replaced, fitts perfectly, not clearance issues with anything, it was only about $56 from the local repco, but that may have been staff rates. hope that helps

Rogue-VL

**SL666** · 25-02-2006, 02:28 PM

rogue: nah thats retail

staff price is around half that.. - for the windsor part.. there's also a jeep one thats a bit smaller.. - this is the pulley i used as i dont have air con or power steer

**Mr DOHC** · 25-02-2006, 10:22 PM

dont change your auto fluid, just get the auto serviced, so it can be adjusted, its only like $120 to get it done, compared to $60 for the oil/filter

**SL666** · 26-02-2006, 11:00 AM

DOHC: what do they actually adjust?

**Mr DOHC** · 26-02-2006, 12:10 PM

the bands, they tighten up around the drums which engage the gears

http://auto.howstuffworks.com/automa...ansmission.htm

**CrUZida** · 26-02-2006, 12:24 PM

There are bands in Toyota's electronic transmissions?

**Mr DOHC** · 26-02-2006, 12:41 PM

there isnt??????

**SL666** · 20-03-2006, 08:19 AM

I can confirm the part # for the timing belt is correct, and the part number for the timing belt tensioner is 1350546020.

**barned01** · 20-03-2006, 04:05 PM

I'm still about 2 months away from ordering parts so sorry i can't confirm just yet.
I will add the part number you have there for the timing belt tensioner however.
Are you happy to wait?
or ring penrith toyota, they seem to have a good grasp on all things 1jz

**SL666** · 20-03-2006, 06:19 PM

? i dont care.. i was just letting you know what the part numbers are

these are the correct parts, because they are on the invoice i have for the parts that fitted

**barned01** · 20-03-2006, 07:58 PM

ha i just re-read your post and noticed the "i can confirm" bit

**barned01** · 06-04-2006, 11:38 PM

just got my parts today
I noticed the water pump 16100 49846 says it is a pump.wtr2jzgte jza80
i read on the ever reliable net that the 2jz water pump wasn't compatible with the 1jz.
is this not the case and they are 100%interchangeable. also i have read a different part number every now and then. 1610049845 is there 2 different water pumps floating around?

I gave toyota my chassis number so i assume it must be correct but i thought i might ask first.
JZZ30 soarer by the way.

**SL666** · 07-04-2006, 07:02 AM

i believe there is different water pumps depending on what car they came out of.. the water pump that went on my soarer 1j said 2jz-ge on the side of the box i think..

od bod lookin thing that goes back down the block beside the engine.. has a pipe bolt in the back, and a pipe slide in with o-rings on top, and he thermostat housing go on the bottom..pointing out toward the ground/wheel