Are the RWD waterpump components for 4AGE still available?

[Grega]

As my subject states, are these still available new from Toyota by chance? and if so, has anyone dared to see how much they are worth?

Also does anyone know if the std FWD water pulley will work with the RWD setup (pump/housing ect)

Many Thanks

(sorry my search here didn't really help)

[mr2gze]

As my subject states, are these still available new from Toyota by chance? and if so, has anyone dared to see how much they are worth?

Also does anyone know if the std FWD water pulley will work with the RWD setup (pump/housing ect)

Many Thanks

(sorry my search here didn't really help)

Yep, the front half is about ~$70 trade.

No the fwd pulley will NOT work with the rwd housing, as it is a different offset to the rwd pulley.

cheers

[MRMOPARMAN]

the fwd waterpump drive flange is at a different offset to the rwd setup. never tried pressing it to line it back up, although im sure it would be possible given the right tools.

read this thread for more info:

http://www.toymods.net/forums/showth...ight=waterpump

[stidnam]

You can get some of the rwd 4age bits from road and track.

the fwd pulley will not work with the rwd pump it will result in the pulley not lining up with the crank pulley.

This is because the rwd water pump is longer than the fwd wp. The pulleys have different offsets so that the for each original setup the resulting belt drive grooves are in the same position.

[Grega]

stidnam..........ta mate. road and track ftw
mrmopar....good thread that explains alot.
mr2.......no worries ta

+rep up

[Sam_Q]

if you can wait a couple of days I can give you a powermax part number so you can get it from any auto parts store

[Grega]

sam, no worries, i'm in no rush matey, all good
PS : your 20v guide to waterpumps is GOLD.

[Sam_Q]

yeah ok when I am at my parents in a few days I will let you know and thanks for the compliment, I have a huge update of that coming in the works

[oldcorollas]

heres a couple from yahoo

drive joy V9154-T052／TWP183
http://page19.auctions.yahoo.co.jp/jp/auction/x28293625

GMB GWT-62A
http://page18.auctions.yahoo.co.jp/jp/auction/w16275579

Aisin WPT-052
http://page6.auctions.yahoo.co.jp/jp/auction/f58094520

there are some GMB pumps, btu the pics of them look wrong

[Mr Revhead]

yes all the different RWD cooling system bits are still available new from toyota
came with the alternator brackets

[Grega]

Mr.Revhead................email sent

[oldeskewltoy]

fwd pumps have less sturdy pump bearings... they are not designed to carry a fan. Do you also need the rwd housing??? Most aftermarket pumps ONLY come as the front half... the part carrying the impellor. I believe the rear half is only available as an entire assembly.

Part number for complete assembly 16100-19095.

[Sam_Q]

ok I only have the part number for the front FWD half, if your not using a mechanical fan its fine so long as you grab a pulley from your local wrecker.Here it is:

Powermax W1062W

any auto store or they come up on ebay sometimes

[Beserker99]

Hmmmmmmm...

Water Pump (RWD) - Powermax - W1062 - $58.23

I got for mine a while back. Fit straight onto the RWD housing, and I'm still running normal clutch fan. But yeah, front half only.

[Sam_Q]

hmm I was told thats a bad idea because the RWD pump has an additional bearing to cope with the loads of the fan