3T GTE Tech

[RiceburnaGTV]

Selling 3tgte stuffs, sorry to whore thread but im sure someone will be interested in a HKS exhaust cam...


rinky:

http://www.toymods.org.au/forums/eng...ml#post1368465

[RiceburnaGTV]

Gasket thickness is based upon the clearance from piston to head. Some engines that I've done have the pistons "out of the hole", because they've been decked a lot (previously). I like to run them from 1.25mm (std), down to about 0.75mm (NOTE: that's clearance, NOT HG thickness).

Cool, I just picked up a cometic HG for cheap so hopefully it will mate up ok with the TRD forgies in the engine, otherwise where can I get a custom HG from?

[gt-t corona turbo]

where can i get a set of forged pistons and conrods for a 3t-gte??? and what price range are they???

[3sgte]

There are a multitude of options that have been discussed through the thread.

[steeko]

GT-T i got my forged pistons and eagle conrods from BRD racing in USA. He's a bit unreliable now and got my second cometic 2TG head gasket from paradise (Paradise Racing - Home), dude is very helpful. I got the rest of the bits from Stewart Wilkins motorsport - like chains, bearings, etc.

I also got some hard to get stuff from Kameari in USA- like timing chain tensioner, sprockets and upper guide/sprocket.

From memory the stock piston is 85mm, i couldnt' source 86mm, so i got 87mm. Here's a set of Arias turbo ones for the 3TC at 8.5 compression ratio, this is what i'm using (albeit on 8psi and smokey turbo)

Paradise Racing - Arias 3TC 87mm Turbo Pistons

[toyo-al]

Hi guys, could anyone tell me off the top of my head what the dimensions of the lower 3TGTE alternator bolt is? Saves me having to drive to the bolt shop, pull my car apart on the side of the road, put the new bolt back in and drive home

[spaz021]

where in hobart can i get the following: 3tgte exhaust gasket, st185/mr2 ct26 twin entry gaskets dump ect ???

[chumo]

please i live in Peru and I bought a Japanese import 3TGTE and here there are not many of those engines and I can not put it together to finish, excuse if mi english is bad , but i need the electrical diagrma, thank you

[WDE_BDY]

The 3TGTE
Read through that page and the 4 diagrams are around half way down.

Callum

[chumo]

thanks but i have it and tell me that there is an error, my problem is I have no reaction to the injectors, but the engine turns on.
this is my car " HASHIROKU'S KILLER "
:: Club Toyota Corona del Perú ::

[spaz021]

so new turbo is on ct26 twin entry, spagetti manifold only on 12psi to make sure nothing goes pop... even the old ct20 lived on 16 all day long.... im so itching to put new injectors in and put her on the dyno and wind the boost up feels like its making more power on 12 outta this turbo then the old one plus it comes on quicker and alot damn stronger!!!! lovin the 3tgte atm!!!

[YelloRolla]

Good to hear - the CT26 is a lovely turbo on the 3T GTE.

[spaz021]

Good to hear - the CT26 is a lovely turbo on the 3T GTE.

i couldnt believe how quick it spools WOW huge fan of twin entrys now!!!

[gt-t corona turbo]

i just put a kill kenny casting W033 18r theremostat housing on my 3tgte and its much better facing forward instead of being off to the side of engine. im glad toyota makes things interchange with other toyota stuff and it makes life easyer.

[1JZ-Rolla]

Certainly makes plumbing the radiator hoses much neater hey. Just beware that it doesn't end up being the highest point in your cooling system, in my car it ended up slightly higher than the radiator top tank, so I had to tap it and fit a bleed point to remove any trapped air.