Page 3 of 7 FirstFirst 12345 ... LastLast
Results 31 to 45 of 92

Thread: X71 engine conversion

  1. #31
    ANGRY MAN 2011 Chief Engine Builder Admiral coFF33's Avatar
    Join Date
    Nov 2005
    Location
    West Australia
    Posts
    4,383

    Default Re: X71 engine conversion

    Yeah , if MATTAE86 hasnt used my 1GGTE pump yet , might throw that in the tank
    Piece of piss.

  2. #32
    Low Down Style Domestic Engineer Johnzoku's Avatar
    Join Date
    Oct 2006
    Location
    queensland
    Posts
    713

    Default Re: X71 engine conversion

    Quote Originally Posted by coFF33
    Also , Did the 5M have the same BHG issues as the 7M ??
    No, its only 7m's that seam to have the design flaw with the BHG's, but if you were going to conver to a M motor, id go 7M, im pretty sure they bolt up to 5m mounts and you get alittle more power out of them as well... newer, demestic, etc... altho 6m's are pretty sweet

    Quote Originally Posted by MR 1JZ
    remeber john you need to sort a new fuel system as welll...going from carby to EFI...

    unless you throw a set of webbers on a 5MGE

    now that would be cool
    a few months back there was an HKS manifold on yahoo auctions japan for the 5M/6M so you can put tripple webbers on it... should of got it whne i had the chance it would of been hell cool to use

  3. #33
    ANGRY MAN 2011 Chief Engine Builder Admiral coFF33's Avatar
    Join Date
    Nov 2005
    Location
    West Australia
    Posts
    4,383

    Default Re: X71 engine conversion

    TOYOTA 6MGE, 3L, twin cam, low km, complete, suit Cressida, Crown or Supra $600 ono. Crmbne. 0412-478-256

  4. #34
    ANGRY MAN 2011 Chief Engine Builder Admiral coFF33's Avatar
    Join Date
    Nov 2005
    Location
    West Australia
    Posts
    4,383

    Default Re: X71 engine conversion

    Found : 1987 Cressida , LIC, Not Running (BHG) 5M-GE $400ono

  5. #35
    JZ Powered Too Much Toyota EldarO's Avatar
    Join Date
    Oct 2005
    Location
    Western Aus
    Posts
    5,614

    Default Re: X71 engine conversion

    that 6MGE is Mark a.k.a Triptek

    Elmo.

  6. #36
    JZ Powered Too Much Toyota EldarO's Avatar
    Join Date
    Oct 2005
    Location
    Western Aus
    Posts
    5,614

    Default Re: X71 engine conversion

    Quote Originally Posted by coFF33
    Found : 1987 Cressida , LIC, Not Running (BHG) 5M-GE $400ono
    you buy, ill take the shell, you take motor, ill give ya $200 for the shell.

    Elmo.

  7. #37
    Low Down Style Domestic Engineer Johnzoku's Avatar
    Join Date
    Oct 2006
    Location
    queensland
    Posts
    713

    Default Re: X71 engine conversion

    Quote Originally Posted by coFF33
    Found : 1987 Cressida , LIC, Not Running (BHG) 5M-GE $400ono
    Strip all the front loom from your car, fuel tank and maybe fuel lines
    get 400 cressida, get tank, loom, accrssories, etc...
    get 6m that pugs into 5mge loom (its a very very easy conversion i hear, almost pulg right in)
    get w58 while your at it so you can make music in netural at 100km/hr
    sell shell and 5mge for parts
    benfit

  8. #38
    Triptek Enhanced Backyard Mechanic triptek's Avatar
    Join Date
    Mar 2006
    Location
    Western Australia
    Posts
    444

    Default Re: X71 engine conversion

    I was gonna go and have a look at that cressy this arvo, i only need the shell. So maybe we could organise some sort of part swap for my 6m.
    1990 SW20 MR2 turbo Gen III 3S-GTE conversion, 3" exhaust = 264.9rwhp
    1985 JZA61 2JZ-GTE + TO4Z = 442.1rwhp @ 18psi
    1991 JZA70 Limited 2JZ-GTE vvti GTX30/76r
    1994 GZX90 Mark II 1GZ-FE V12
    1980 MA45 Undergoing Restoration

  9. #39
    Low Down Style Domestic Engineer Johnzoku's Avatar
    Join Date
    Oct 2006
    Location
    queensland
    Posts
    713

    Default Re: X71 engine conversion

    lol... there you go coffee, sorted

    then all you need to do once your done is add a Z to the 6M... like i want to do

  10. #40
    ANGRY MAN 2011 Chief Engine Builder Admiral coFF33's Avatar
    Join Date
    Nov 2005
    Location
    West Australia
    Posts
    4,383

    Default Re: X71 engine conversion

    Triptek.

    What u wanna do buddy. ???

  11. #41
    ANGRY MAN 2011 Chief Engine Builder Admiral coFF33's Avatar
    Join Date
    Nov 2005
    Location
    West Australia
    Posts
    4,383

    Default Re: X71 engine conversion

    I guess my other option is to go get that $500 cressy that is unlicenced
    Take my SA plates with me (the ones i got off my white soarer when it came to WA from SA)
    chuck em on , drive it home and steal the "Runs well " engine

  12. #42
    Party Animal Supreme Too Much Toyota MR 1JZ's Avatar
    Join Date
    Sep 2005
    Location
    South Australia
    Posts
    6,576

    Default Re: X71 engine conversion

    and then post all about it on a public forum...lol you douche

    just get a permit

    $30 and legal
    Project Soarer II - Sold
    Evo 5 - The silver fruitbox
    "I'm the man who has the ball. I'm the man who can throw it faster than f**k. So that is why i am better than everyone in the world. Kiss my ass and suck my dick... everyone."

  13. #43
    ANGRY MAN 2011 Chief Engine Builder Admiral coFF33's Avatar
    Join Date
    Nov 2005
    Location
    West Australia
    Posts
    4,383

    Default Re: X71 engine conversion

    stfu matthew its WA not SA .... OI TRIPTEK WAT U WANNA DO MAN !?

  14. #44
    Triptek Enhanced Backyard Mechanic triptek's Avatar
    Join Date
    Mar 2006
    Location
    Western Australia
    Posts
    444

    Default Re: X71 engine conversion

    I gotta look at the car first to see the condition of it, i want it for a 1jz conversion.
    1990 SW20 MR2 turbo Gen III 3S-GTE conversion, 3" exhaust = 264.9rwhp
    1985 JZA61 2JZ-GTE + TO4Z = 442.1rwhp @ 18psi
    1991 JZA70 Limited 2JZ-GTE vvti GTX30/76r
    1994 GZX90 Mark II 1GZ-FE V12
    1980 MA45 Undergoing Restoration

  15. #45
    ANGRY MAN 2011 Chief Engine Builder Admiral coFF33's Avatar
    Join Date
    Nov 2005
    Location
    West Australia
    Posts
    4,383

    Default Re: X71 engine conversion

    i rang the lady, She said its the burgandy colour, Perfect condition outside and in Shes kept it very good undercover etc etc. only issue is BHG and she already has a new car.

    Sounds good to me !

    did u want her number?

Similar Threads

  1. MA70 --> JZA70 Conversion
    By Lambolica in forum Engine & Driveline Conversions
    Replies: 119
    Last Post: 09-09-2007, 08:39 PM
  2. ra40 engine conversion?
    By noobra in forum Tech and Conversions
    Replies: 14
    Last Post: 26-11-2006, 02:16 PM
  3. Cooling Systems - Overheating Problems.
    By BrianRA23 in forum Tech and Conversions
    Replies: 4
    Last Post: 24-06-2006, 09:40 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •