7KE and 4KE injection manifolds PICS

**Mr Revhead** · 25-09-2007, 08:24 PM

ok, im going to drrraaaaag this back up...
injectors....
oldcorollas, you say different injectors are hard to source for a 7k manifold.... but you didnt say impossible... have you found some?

or

what would it take to make the manifold accept normal type injectors? just a quick bore out of the injector mount?

**oldcorollas** · 25-09-2007, 08:38 PM

ok, i had a look at some ST215 3SGTE injectors.. they look liek the same type, ie, thin, plastic body. so i would be looking at late 90's motors for them.

or

the injector sits on a plastic cup. the plastic cup sits in the manifold. the fat body of the normal injectors fouls on said plastic cup (not sure of the ends are same size or not, and not sure on length).
it should be very easy to machine up some alloy cups to press into the manifold, to hold normal injectors. as long as you get the rigth length between the cup and rail.. but you can work that out from the original injectors etc...
should be very easy

**Mr Revhead** · 25-09-2007, 08:41 PM

awesome, thanks
am about to embark on a project using a 7k manifold and am still in research/scrounge mode.... this thread has been useful
getting my hands on some ST215 injectors wont be hard... though they may be a little big!

hmmmm maybe those awful import D4 coronas have the same kind
ill be sticking my head under the bonnets of some cars at work... if i find ones that look liley ill report back!