Rebuilding a 2TG

[myTA22]

Does anyone have any rebuilding manual for the 2TG engine?
I bought one for my car but unsure if it runs so before I transplant it in my car I was thinking of rebuilding it. Any help appreciated. Also can you buy any parts for this engine from any autoparts shop or do you have to go to Toyota.


Alex

[CraigD]

Does anyone have any rebuilding manual for the 2TG engine?
I bought one for my car but unsure if it runs so before I transplant it in my car I was thinking of rebuilding it. Any help appreciated. Also can you buy any parts for this engine from any autoparts shop or do you have to go to Toyota.


Alex

Hi mate
I've got a manual here that you could use and also i work for toyota so let me know what you need and i'll try and find the parts for you. You should be able to find most parts from autoshops aswell.

craig

[w810sc]

Alex
http://www.swmotorsport.com/
most components you will need is there, also what head do you have?
when i bought a complete gasket kit from another auto shop it was for a 88260 head (oval timing chain inspection plate) when i needed a 88222 (rectangular timing chain inspection plate).
It was an easy fix, i got some gasket paper, traced around the outside of the plate, cut it out, pressed hard on the inside edges so that they had an in-print on the gasket paper and cut the inside out.

http://www.redlineauto.com.au/
for soft mounts, the rubber gasket that goes between your solex carby and the intake manifold.

http://www.carburettorservice.com.au/
for carby tunning, and suppling ram tubes and ram socks for carbies

http://www.rmcarburetors.net/
Rodger's site, all you need for your solex and other carby needs.

do a search and you will find rivers thread and Thetoymans thread all about the 2T-G

CraigD, is that the green 2T-G manual? if so would you consider selling it.

[w810sc]

before i for get:

http://www.toymods.net/forums/showthread.php?t=16951
electronic ignition for the 2T-G, something to invest in while you are in the rebuilding stage.

fonzy

[CraigD]

CraigD, is that the green 2T-G manual? if so would you consider selling it.

Yeh it is.
Sorry dude i wanna hold on to this.

[tricky]

Keep your eyes on e-bay. Genuine 2t engine manuals pop up less frequently than 18r ones, but there is still probably one every two weeks or so. I bought one for my brother recently. In fact, there's one on there now... But don't all bid on it at once .

If you want any specific data, send me a PM and I'll send it to you. Good luck!

[w810sc]

http://search.ebay.com/search/search...&fsop=1&fsoo=1

yeah only for the 2T. One day ill find one for the 2T-G.

[myTA22]

Hi mate
I've got a manual here that you could use and also i work for toyota so let me know what you need and i'll try and find the parts for you. You should be able to find most parts from autoshops aswell.

craig

Thanks, were abouts are you located, im in quakers hill

[myTA22]

I just looked at the engine and the head is a 11111-88220

Is that a latter model head or early?

Sorry for the stupid question but been a mazda man most of my life, I bought this car 3 months ago and dont know much about them, slowly trying to learn.

[w810sc]

88220 is the early heads, smaller valves intake and exhaust, different style valve cover and rectangular type timing chain inspection plate.
River's thread:
http://www.toymods.net/forums/showth...&highlight=2tg

Thetoymans thread:
http://www.toymods.net/forums/showth...&highlight=2tg

search:
http://www.toymods.net/forums/search...earchid=289495

keep us posted on your re-build

fonzy

[CraigD]

Thanks, were abouts are you located, im in quakers hill

I'm in parra but work in castle hill

[river]

Hi,

I have the 2T-G rebuild manual and I've scanned it to CD.

seeyuzz
river

[tricky]

Woops, my bad. I assumed the 2t one had the 2tg as well. Turns out the one I bought for my brother was the T-series engine manual. After some appropriate revision of the ebay search, there is one... But it's in the US, so I guess it depends on how desperate you are.

[myTA22]

Hi,

I have the 2T-G rebuild manual and I've scanned it to CD.

seeyuzz
river

Any change of gettin a backup of this cd ?

[TheToyman75]

Alex,

If you are rebuilding your 2TG and happen to have a 3T in it now then if the budget allows it would be the perfect time to rebuild your 2TG as a Hybrid. Theres allot of info on the site about what you need to do but for the budget conscious you could just have your 3T pistons flycut to clear the 2TG valves

Good luck with it and I wouldn't be concerned about having the small valve head unless you were planning on chasing some big numbers.