MA70 wiring

[[email protected]]

hey all, trying to fix the wiring on my loom, when the trans was "stolen" they cut the plugs on the engine side of the loom, and i cant find any one on here with plugs to adapt back to the loom so i have to wire it by wire and the colours appear to be diff, i think i have found where the square plug goes, i just have 2 round plugs to sort wiring out for.
i also found on my new box a wiring loom that dusnt attatch to the box, it has a triangle shaped plug at one end that is white and the other is a rectangle black plug and the wires are red and black from memory. does anyone know how these wires on the loom go to the ones on the box, as for the box i have worked out they dont colour match so does anyone know what colour goes to what, would be very appreciative if anyone can help, or if someone has those two white round plugs i need i would be very greatful, thanks guys and gals, Dave

[sideshow]

what car and what engine is it
is it std setup

if you cant find anyhting at wreckers let me know and ill have a look

i have afew boxes of plugs and stuff

and is the new trans exacty the same as yr old one
cause if its different you might have to find what all wires do on old and new then match them up

another thing might be yr old gbox was non abs and the new one is abs
so you have the extra plug

[[email protected]]

the new box is from a 7mge Cressida and the supra is a 7mge with abs i think. the only plug thats fits is one of the white round ones bonds with a rectangular 6 prong connection. its standard set up also and its a 1987 model ma70. the 2 white plugs need the connections and if that square one is meant to join the white round 1 then i need to sort out the wiring for the other plug. it comes from the shifter mechanism on the box, so i dare say that is stopping the car from running , cheers for the help mate, if you have the plugs i need that would be excellent

[TA-022]

wrecker in Blacktown Sydney currently has a MA70 with all engine bay wiring.

i could chop the plugs with plenty of wire left.

i may be down there this week for some stuff so let me know if your interested.

[[email protected]]

yeah im interested , how much would you want for the plugs ? thanks mate,

[TA-022]

meh wateva the wreckers charge ...hand full of plugs they normally let ya walk out with no charge ....i always show em and i think its a case of i didnt hide em so i get em for free?!

[[email protected]]

yeah mate that sounds awesome you can contact me on 0407 394 768 if you have any info, cheers buddy

[TA-022]

aight

well ive got tommorow off and i might be going to peakhurst to see the engineer so ill stop in .. ill let ya know