Options for a fuel pump setup 4AGE 20V engine upgrade

**ArubaAe86** · 20-06-2011, 10:25 AM

Hi, I was wondering if any body has an idea for a fuel pump upgrade when in need of more fuel. By this I mean the installation for a bigger in tank fuel pump. Any of you has made a some sort of bracket or have other options? I'm upgrading my 4AGE 20v engine to a turbo setup with bigger injectors and more fuel is necessary . I have the engine in a Corolla AE86. Thanks in advance for any help and ideas.

**beerhead** · 20-06-2011, 01:04 PM

Walbro 255 LPH in tanks are a cheap and seem work fine. Easy fitment in a baffled AE86 tank too.

**ArubaAe86** · 21-06-2011, 01:16 AM

Originally Posted by beerhead

Walbro 255 LPH in tanks are a cheap and seem work fine. Easy fitment in a baffled AE86 tank too.

Thanks for the reply beerhead. I have a new Denso fuel pump already but needs fitment. Problem is the car was a carburated engine car and didn't have an in tank fuel pump. Do you know how to make a bracket for the AE86 fuel tank or do you know of any other bracket that will fit?

**oldeskewltoy** · 21-06-2011, 10:02 AM

replacement tanks are under $140.00 @ Rock Auto ( http://www.rockauto.com/catalog/moreinfo.php?pk=17816 ). Not knowing if you have Rock auto... you might try one of many local parts places to see if you can purchase a GT-S tank

**ArubaAe86** · 22-06-2011, 02:41 AM

Originally Posted by oldeskewltoy

replacement tanks are under $140.00 @ Rock Auto ( http://www.rockauto.com/catalog/moreinfo.php?pk=17816 ). Not knowing if you have Rock auto... you might try one of many local parts places to see if you can purchase a GT-S tank

Do you have an idea how I can make a bracket for the in tank fuel pump since this was a carburated car and didn't have an in tank fuel pump before.

**LeeRoy** · 22-06-2011, 10:37 AM

Originally Posted by ArubaAe86

Do you have an idea how I can make a bracket for the in tank fuel pump since this was a carburated car and didn't have an in tank fuel pump before.

Pull out the sender unit and cable tie a walbo to the stork?

Or run a lift pump into a surge tank then a main feed pump.

**BiGbEn** · 05-07-2011, 06:59 AM

since we are on the topic and dont see the need to start a new topic for it, how the hell do u get that retainer onto the walbro pump?? that small metal thing to hold the filter onto the pump. cant seem to make it fit

**shadowR** · 07-07-2011, 11:53 AM

When in doubt of an intake install, I usually leave the intank in place and run something like a bosch 044 inline to the original.

This has been how ive gotten out of EFI conversions in the past.