All,

As I have a 1GGTE sitting here collecting dust, I'm collecting all the bolt on bits (thanks Chris) so I can utilise it in the not too distant future.

At this stage, I've what appears to be a Gen2 motor with a GZ20 Soarer loom, ECU, AFM and Coil/Ignitor (again, thanks Chris) what other bits are there I might possibly need that will plug in to this loom, that normally don't hang on the engine? (I've basically got an engine with a cut loom at the firewall - and a new complete loom to fit)

I know the Gen3 in the G series Supra (GA70 i think) has a resistor pack for the injectors to probably increase the resistance in the circuit that the ECU is expecting to see but the Gen1/Gen2's don't appear to have this.

All comments/ideas welcome

Many Thanks