Negative Rear Camber bolts for MA61/MZ10/MX73 !!

[bbaacchhyy]

Hi peoples,

I forgot about the camber bolts & washers that i had lined up for this little project. As the rest of the gear is going, so will these puppies.

Now, i have about 20 sets (pairs of bolts, washers and nuts - need to double check the exact number) that will do 20 cars, and I can supply the drawings so that some knowledgeble person can get this organised and do a service to those MA61/MZ10/MX73 owners out there.

When posted in the old forums, I had 21 takers for a set of bolts and brackets. See the thread here

http://forums.toymods.org.au/index.p...t=0#msg_665648

The bolts are from the rear of a BA Palcoon and the RRP is $37.xx per side !!!!! They need to be cut down in length by about 20mm which is easy. They allow the use of the std inner bushes, so make the job real easy.

I am happy to pass these on to a person (at what was my cost) that will do the right thing by Toymods and Fellow Supra/Soarer/Cressida owners.

If you are interested, drop me a PM and well discuss the nitty gritty

Cheers

Michael B

[Ashe]

I Think I would Like a set however it goes.

[WDE_BDY]

I would be very interested in copies of the drawings, so I can get these made up in NZ.

Callum

[bbaacchhyy]

I would be very interested in copies of the drawings, so I can get these made up in NZ.

Callum

Hiya Callum,

I'll leave that issue up to the buyers of the bolts, but I think that Norbie/Wilbo666 are the guys that you'll need to talk to.

Cheers

Michael B

[LukeMX73]

How much for a set of these bolts???

[cambelt]

Wow a 8 year thread revive , I seem to remember some talk of cutting the subframe mounts off and re welding them on in a slightly different spot , maybe search that one .
Dave