might i add whiteline swaybars,
Front:
BTF-76
27mm
$213
Rear:
BTR-21
19mm
$171
that's what i'm running, very well balanced with 300lb front springs and 220lb rears. totally nuetral on the apex, little push on entry, little tail on exit. very nice.
Dam, well i be. I never came across that. Top stuff Wilbo *thumbs up*
Edited the first post to include this information and a link to Wilbos post.
Last edited by Negative Boost; 07-09-2006 at 11:09 PM.
MA61 Part Numbers, Upgrades and General Infomation <--- Clicky Clicky
might i add whiteline swaybars,
Front:
BTF-76
27mm
$213
Rear:
BTR-21
19mm
$171
that's what i'm running, very well balanced with 300lb front springs and 220lb rears. totally nuetral on the apex, little push on entry, little tail on exit. very nice.
This is a really far out, witty and clever signature.
Wha i didn't think the MA61 rear sway bar fitted unless they fixed it![]()
If in doubt power out
It was the front swaybar which didn't fit, not without mods anyway. This was the case a few years back but they might have got their act together by now.
Norbie!
www.norbie.net
I think they have fixed it now...but it's not probably big enough to warrant the upgrade, unless someone with experience with it can prove me wrong, off the shelf is handy.
Teh UZA80 - Project Century - Remotely p00'd by association
like i said, it woks bueatifully. bolts straight in. it's only 3mm bigger but the steel has a much higher torsional rigidity, ie: much stiffer than a 3mm increase in the same material.
This is a really far out, witty and clever signature.
Awsome stuff nb86! Thanks. I was trying to look for them part numbers a little while back but couldnt find them i.e couldnt be stuffed.
MA61 Part Numbers, Upgrades and General Infomation <--- Clicky Clicky
Noice!
The US guys were having issues with the mounting tabs for the rear sway bars breaking after putting their Addco bars on, I take it you haven't had any hassles with this, nb86? How long have you been running the bars for?
Just have an update on prices for the shifter bushes, they've gone up(unless I got ripped off!). Also adding accordian hose and oil filter p/n for anyone interested. The oil filter is the same for all M series motors and is the same for 3s and 2jz motors according to the box.
7M-GTE Accordian Hose 17882-42012 $93.95
Rush Shift RN7808(Bush on bottom of W58 shifter) 33548-31010 $8.64 *not RN7807 as in OP
Seat MTM LVRLN46811(W58 shifter lower seat bush) 33505-35020 $19.50
Oil Filter(All M series motors) 90915-YZZD2 $19.85
$100 for accordian hose!!! Jeebus
Yikes.... I think i'll just bodge fix the crack in mine...
Thanks Ma61 Turbo, ill give ya some rep when it lets me
And Rob, just had an idea, i better put your tech articles up here aswell
MA61 Part Numbers, Upgrades and General Infomation <--- Clicky Clicky
Bodge fixing is alright to a point...I think i was starting to smell melting duct tape by yesterday afternoon thoughOriginally Posted by Negative Boost
![]()
Cheers for that mate, appreciate itOriginally Posted by Negative Boost
![]()
MA61 Balljoint: TBJ314 (from Repco) - $48 each
Hydra
JZA61 Celica XX
Awsomeness
MA61 Part Numbers, Upgrades and General Infomation <--- Clicky Clicky
Bookmarks