XT130 caliper bolt spacing question

[ToyTA22]

I just purchased a set of xt130 strut legs for my TA22 but have found the caliper bolt spacing is 100mm apart unlike my prior RT132 struts which were 90mm. What caliper will fit these, preferably twin pot or four pot type.
Thanks Tony

[Bazooka]

Have a look at R32/33 calipers. I think they are 100mm.

[crowncustom]

I doubt they are XT130 sounds like they may be ST141.
Cheers Brett.

[bmxer54]

xt130 and rt132 strust are the same with bolt spacing of 90mm and the holes threaded. xT14x, xX7x and xA6x all use 100mm bolt spacing and the holes are not threaded for 100mm spacing i believe r33gtst caslipers are the go BA rotor if 5 stud and mazda MPV rotors are used for 4 stud with slight hub mods

Cheers,

Peter