Ground control suspension set up for celica gt4

[Bazda]

I am interested Bazda. Tell me more and price?

All the pricing is in those links I sent you .
Want to talk more details send me a PM.

[Bazda]

yes the set i did was my one and only. i wouldn't do it again. you don't have the proper ability to adjust ride height without changing preload on the springs, really you need to just fit longer or shorter "capture springs".

proper coilovers have adjustment on the strut mount so you can adjust ride height without affecting suspension travel etc.

the only issue, as always is that no-one makes them for the st165. correct me if i'm wrong, but i think the st185 rears fit, but it's the strut-hub bolt spacing that is different? hence why i'm going to try and fit st185 hub/uprights.

not to offend but my memory sucks.....which jarrad?........

We do coilovers for both models.

[jonathan yee]

really? damn just bought some st18x uprights to do the swap, oh well. wanted a spare set to try conv stud pattern to 5x114.3

so the fortune auto also do st185 and st165?

should clarify my previous post, rear swap straight on and the fronts have the diff bolt spacing

[Bazda]

really? damn just bought some st18x uprights to do the swap, oh well. wanted a spare set to try conv stud pattern to 5x114.3

so the fortune auto also do st185 and st165?

should clarify my previous post, rear swap straight on and the fronts have the diff bolt spacing

They dont list them but we can get them made.

[senior fred]

Well I have given up on the Ground Control idea. To many problems and the cost makes it not worthwhile.

I contacted Brian (Bazda) at Manon Racing Products. What a nice guy. He is making me up a tailor made set of coil overs for my ST165 at a good price.

If you are interested I suggest you contact him.

I think this is a great way to go. If I am unhappy with the spring rate I selected, I can change them. (buy another set). If things change in the future I can always go back and talk to him. He is a guy that personally knows Toyota's.

Have a look at his sight, he is in the sponsor page.

Cheers
Fred

[MWP]

I hope he does a better job that the struts in the photo above.
Using large helper/tender springs like that shows someone hasn't put enough effort into designing a proper setup.

[Bazda]

I hope he does a better job that the struts in the photo above.
Using large helper/tender springs like that shows someone hasn't put enough effort into designing a proper setup.

Of course we will do a better job. Ours are fully adjustable via the strut length. Not using the spring perch to adjust height.

[shrike]

Barrys a good guy hes slowly getting more business from me as I can be bothered building my ae111