anyone know a good wheel repair/redrilling place?

[2004lowlux]

hey guys,
well looks like ive got bugger all chance of getting what i dropped on these rims back so im looking into getting the pcd changed.
does anyone know a good wheel repair place around sydney preferably around castle hill area cause i was wondering if its possible to use the holes they have already but as they have a steel insert in them if maybe it can be taken out and an off center one put in making the pcd 4x114.3 instead of 4x110

was going to scrap them but then i started polishing one up and my god it looks good!
any HELP will be appreciated

[oldcorollas]

also try advertising on Ausrotary perhaps? on rollaclub?

[ToyTA22]

Try any small engineering plants in your region. I and my BIL used a small place, unluckily on Gold Coast, for or rally cars. He milled hole offset then machined up steel inserts and pressed them in. He only charged $40.00 per wheel. Unluckily he passed away from cancer a couple of years ago.

[LeeRoy]

Try Circle Track wheels in Seven Hills or speak to a machine shop about having them redrilled.

I thought in a decent number of cases, wheels come as blanks and it's often the distributor or wheel shop (if they're large enough) who drill the stud pattern in them.

[Suavemechanic]

ask at your local tyre shop , there are a bunch of rims out now that come un drilled , the guy they use will have the gear and the nouse to change offset, re drill etc
cheers !

[2004lowlux]

thanks guys ive made a few enquiries also found neals wheels in stratfield might be able to do them at 55 bucks a rims but see if i can get one of the closer shops to do them