I said a capable driver.
If in doubt power out
Project megap00 - Gave up and sold up. Money tree died
oh, crap... that's really not good in a car that new (& expensive), that in theory is designed for a bit of punishment.
Yes, well, in breaking news I may have to bring the IS-F. The new driveshafts I got (from ebay, so serves me right in a way) don't fit. The splines are about 4mm bigger in diameter than the factory units (32mm vs 28mm). WTF man.
I know the hubs are right, theyre genuine toyota and fit the old driveshafts fine. Grrr
Project megap00 - Gave up and sold up. Money tree died
Sucks but will be good to see the IS-F getting driven in anger.
If in doubt power out
True I guess. Shits me though, this is what I bought the GT4 for. Anyway, the ebay seller is in Auburn and is apparently a CV joint shop, so I havent given up yet
Project megap00 - Gave up and sold up. Money tree died
go crack one of the shafts over their heads and ask for a replacement on the spot
Yeah, theyve admitted theyre wrong (these are 32mm dia and 32 splines, the correct ones are 26.5mm dia and 26 splines) , just waiting to see if they have the right ones in stock now. Pain in the arse, I fitted both sides and didnt realise until I tried to put the hub assembly on![]()
Project megap00 - Gave up and sold up. Money tree died
they have given you camry ones... it has h append to me on both sides now.... they dont notice the difference
1990 Aus Delivered Widebody GT4 Play 200 awkw
1996 HDJ80. turbo multivalve 80 series landcruiser
1997 HZJ80 Landcruiser Sold![]()
1993 Soarer V8 Manual Sold![]()
1986 Celica SX Sold![]()
But some camry ones fit....I have camry shafts off a v6 camry on my GT4, all that needed doing was removing the old gearbox spline of the celica driveshafts and put them on the camry driveshafts.
Rona: I'd question the better suspension than me, and i also have decent tyres, but the rest is right, so 1:13s is your goal (or something like that)
Aren't you worried about flat spotting the tyres under brakes though?![]()
"If you try to fail, and succeed, which have you done?"
My ST185 with 278awkw (2.2L is running...)
1:08.08s @ Wakefield 1:37.29s @ Winton
27.90s @ Esses Hillclimb
My suspension is rubbish and my tyres are nexen rubbish. I was running 1.16s last time but I'm turning up the boost this time so hopefully I can give Nath a challenge (all driveshaft issues getting solved thiat is)
Project megap00 - Gave up and sold up. Money tree died
Lol I have Aragosta Coilovers with inverted dampers that are worth $4.5k fair to say they should be better then the stuff in your car. You do have swaybars though? My suspension with a proper alignment should be awesome, atm because it is a bit of trial and error it may not be ideal but it is far from shit.
I still have ABS unless I find the fuse and pull it, not sure what else it effects though.
If in doubt power out
just flop your dicks out and be done with it![]()
"If you try to fail, and succeed, which have you done?"
My ST185 with 278awkw (2.2L is running...)
1:08.08s @ Wakefield 1:37.29s @ Winton
27.90s @ Esses Hillclimb
Woohoo! The CV joint place says they have the right ones in stock, gonna go swap these camry jobs for a couple tomorrow.
Back in business![]()
Project megap00 - Gave up and sold up. Money tree died
Bookmarks