Microtech LT10s: No AFM and "Matrix" Mode

[MWP]

Thanks MWP, Good to know that will work. Will hook it up and take it for a test drive tonight.

Dont be surprised if the AFR readings on the MT dont match those on the XD16.
They could be off by a decent amount.

So if Microtech don't use the 02 sensor for reference - the only value of sending your ecu back to them for an "upgrade" is so you get the wideband afr reading in your handset/laptop display? What a joke

Correct, and that upgrade will cost you a decent amount and probably take >1 month during which time youll have to call them continuously to get a response.
The "upgrade" is probably just changing the values of two resistors and maybe a ECU firmware update, 30mins work at most.

[Rhyno]

Thanks again guys, so just ignore the microtech output and use the XD-16 reading as the actual tuning reference.

@ Cruzida, That 2J1 looks pretty good, might like into them when it comes time to make the 'rona wideband.

Bloody Microtech hey? Time to find annother aussie ECU manufacturer.

Thanks for all your help, you have both saved me a lot of time and aggrevation

"u must spread the love before giving it too MWP and Cruzida again" haha