AW11 wheel bearings and CV boots

[mullett]

Hi guys, couple of minor problems...
I can't get a listing for AW11 CV boots at my local Coventries, but aren't the driveshafts the same as the ST185? (which they have a listing for). If so, I'll grab them.
And the rear wheel-bearings. Anyone got a part number?

Cheers, RM.

[inertia]

Toyota part number:

1984 thru 1989; BEARING ( FOR REAR AXLE SHAFT ) AW1#, 90369-38003.

and if you need the seal kit it's 04422-17010 for 8406 thru 8608, then changes to 04422-32010 for 8608 to 8912...

As for the shaft boots...

INBOARD JOINT BOOT KIT is 04438-17030 or 04438-17031 (after 8608)
BOOT KIT is 04438-17020 or 04438-17021 (after 8608)

hope it helps.

[TooF]

the CV joints on the SC are the same as the st185 ( i currently have 185 cv's in my car)

the wheel bearings are the same as the na. and eaisly avaliable though your local bearing traders etc.

oh and if the bearing is shagged and has chewed out the hub piece it is the same unit as from the front of an ae92 (also currently in my car)

[mullett]

Excellent, that makes it easy to get them.

Thanks guys. +rep for both of you.

RM.

[eastcoastdrifter]

is the CV joint on the NA the same as the SC model.. need to replace on my Rear Right

also out of curiousity are there any other model car Axle Essembly that can transplated onto a AW11?

[TooF]

No the NA/SC CV joints are different (significantly different). i assume youve got a SC joint you need to replace ? goto your local CV man and get some ST185 units they are the same.

are you sure you need to replace the joint they dont tend to fail very regularly.

[eastcoastdrifter]

no I own the N/A version~~

[TooF]

then if youre interested ive got spare shafts and joints in na flavour.

[eastcoastdrifter]

how much? does it come with fries?

[TooF]

you have pm.

[feral4mr2]

i used to have a kelpro number somewhere. will look when i have time.

[worldwalker]

Hello guys, dredging this up to try and find the bearing part numbers to save hassles when I go to state wide and have them pretend to look at the computer then tell me they cant help me. I've got conflicting part numbers for the rear bearing from Protex (PBK 5030 and PBK 5031), and they're fkin expensive but I can't even find front bearings at all for the thing (using Toyodiy comparisons for each). Any bearing manufacturer part numbers for an AW11 that I can then cross reference to get something local would be great!

Thanks.

[dnegative]

The fronts are common AE92 or something, I wouldn't be worried buying one online or over the phone
The rears are different, I've got ones from Repco and they were fine yet my brother tried the same for his car and they were completely wrong, sent them back, got a different set, were wrong etc he had a nightmare getting the right bearing.

I would suggest taking your old ones in and getting them matched tbh

[worldwalker]

I'm assuming they're AE92 rears in the AW11 fronts? That's what I got from Toyodiy (makes sense really). I'll pop them out and see what statewide can do.

[worldwalker]

Is anyone able to confirm if its the AE92 rear bearings that the AW11 front bearings are from? I'm getting loads of different part numbers that dont match up and all the local dealers are giving different numbers plus wildly different prices from $15-$65.

The front bearings I have are a separate inner and outer race, it appears this is just replaced by a sealed bearing kit.