The best option with alloy gilmore drives is to do this.
Stock OEM pulley machined down and the inside of the gilmore machine out.
The best option with alloy gilmore drives is to do this.
Stock OEM pulley machined down and the inside of the gilmore machine out.
1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
Now 9AGTE 410kw atw
www.mrpltd.co.nz - Manon Racing Products
Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
www.facebook.com/mrpltd - LIKE
Check out the Toymods Sponsors section for Deals
I haven't had a good look at mine, but I will tonight. Casey-G are the ones we have like this? I know that they aren't solid and do have a section in the middle like Bazda's pick. Just cant remember exactly what it looked like though.
1967 RT40 Corona Current Project - http://www.toymods.net/forums/showthread.php?t=46182
there IS a difference between the offsets fwd - rwd... but only a little, it equals about 1/2 of a rib
Information is POWER... learn the facts!!
i stand corrected
1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
Now 9AGTE 410kw atw
www.mrpltd.co.nz - Manon Racing Products
Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
www.facebook.com/mrpltd - LIKE
Check out the Toymods Sponsors section for Deals
1967 RT40 Corona Current Project - http://www.toymods.net/forums/showthread.php?t=46182
This is the kit I have. Note the crank pulley on the right at the rear, two-piece jobby! I am unsure as to the rubber though, will have to wait till I check tonight.
1967 RT40 Corona Current Project - http://www.toymods.net/forums/showthread.php?t=46182
Im sure its solid, esp for the price!, they made the side metal as the alloy ones they were making flogged out! Seen that happen.
1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
Now 9AGTE 410kw atw
www.mrpltd.co.nz - Manon Racing Products
Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
www.facebook.com/mrpltd - LIKE
Check out the Toymods Sponsors section for Deals
Baz - Ah OK that is probably the case. nonetheless I will confirm tonight when I get home from work and dig mine up.
1967 RT40 Corona Current Project - http://www.toymods.net/forums/showthread.php?t=46182
Mines 2 piece, steel center that bolts to the outer belt drive. But solid mounted all the same.
Barry that pic on the last page is epic. I'm considering doing it! just for piece of mind.
Yes Baz they are two piece, but no rubber. Solid Steel inner with aluminium outer. I knew they were two piece but wasnt sure on the rubber thing. I wasn't arguing with you mate, just thought that there might of been a chance of them actually doing it that way.
I assume harmonic balancer would be better than it then regardless?
1967 RT40 Corona Current Project - http://www.toymods.net/forums/showthread.php?t=46182
1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
Now 9AGTE 410kw atw
www.mrpltd.co.nz - Manon Racing Products
Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
www.facebook.com/mrpltd - LIKE
Check out the Toymods Sponsors section for Deals
Maybe we should ask ATI to make them to suit 4age's, their pricing is better than the Ross ones.
http://www.atiracing.com/products/da.../damtoyota.htm
1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
Now 9AGTE 410kw atw
www.mrpltd.co.nz - Manon Racing Products
Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
www.facebook.com/mrpltd - LIKE
Check out the Toymods Sponsors section for Deals
Bookmarks