if uve got an intercooler, then u shudnt have to worry to much about a cold air intake. otherwise, u could box off ur pod filter and run sum pvc pipe from under the box to behind the front bar...
easiest way to get it done i reacon...
Hey how are yaz,
ive got a 4agze in an ae82 corolla hatch n i was jus wondering as to wether
anyone has designed a cold air intake for the same situation? any help would be greatly appreciated!!!! cheers
if uve got an intercooler, then u shudnt have to worry to much about a cold air intake. otherwise, u could box off ur pod filter and run sum pvc pipe from under the box to behind the front bar...
easiest way to get it done i reacon...
ive got a top-mount intercooler which is fine but the problem is that when the battery goes in the intake pipe comes down straight into where the battery sits and the airbox has to be legal so i can get it engineered
Battery in the boot for more room then run the filet closer to the front, box it in so its legal, then cut a hold in the bottom of the battery tray and run a tube down. There is a good post about relocating a battery that will help you out if you travel this route
- LeeRoy
Daily Driver: Red Ae93 Project: My TA22 - now with 3s-gteD is for Disco, E is for Dancing
Why not? Every bit of cooling of the air is going to help!Originally Posted by Smokey228
![]()
Teh UZA80 - Project Century - Remotely p00'd by association
^^ thats 100%. but its an ae82 wif a 4agze. that extra 3kw isnt gonna really effect it a whole lot.ahahahah
how hard is it to engineer a relocated battery...? any troubles wif it at all???
Its pretty easy and engineers won't have any probs as long as its done right. It needs to be enclosed in a battery box which you can buy at supercheap auto, and the box needs to be mounted solidly and the battery also needs to be mounted solidly. I'm not too sure but i think the boot also needs to be ventilated. But most boots are ventilated anyways.
- LeeRoy
Daily Driver: Red Ae93 Project: My TA22 - now with 3s-gteD is for Disco, E is for Dancing
Battery in boot, then get a SX rolla or GZE map airbox setup and mount it in the same place. then you can make the cold air entry into the airbox bigger and the inner guard hole bigger and you will get alot more free flowing cold air and be legal.
relocating the battery is very tempting bcoz i wanna have a dual battery setup later on n that would make it a lot easier. does n e one have n e pics of the situation described above? any pics would b great
Have a look in members rides for an engine bay shot of a corolla. You will notice from front to back it goes:
- Pass side headlight
- Battery
- Airbox
And all 3 items are hard against the inner guard so check pics for full understanding
- LeeRoy
Daily Driver: Red Ae93 Project: My TA22 - now with 3s-gteD is for Disco, E is for Dancing
Bookmarks