Twin plate not disengaging

[skin]

Hey trusty toy mod mechanics

I removed a twin plate from a donor car and installed it behind my 1jz
I've bled it properly but it's very nearly not dis engaging, the Ppates hardly rattle compared to what they did in the other car and if u move foot 1mm the car moves.

Is there anyway to adjust this?

[pandaah]

there is mate.. adjust the rod that connects the pedal to the master cylinder, youll see a locking nut and theres thread on the rod.. in your case you'll want to screw it OUTWARDS from the pedal, as in increase the length of the rod between the pedal and the mastercylinder...

just go slowly as this adjustment is fairly touchy with how the pedal feels, i am for about 2inches from the floor to have the clutch bite, thats enough freeplay for me

[pandaah]

you can see the threaded rod in this picture i just copied from google..

[skin]

Thanks man: I did do this think I just buggered it up lol

[pandaah]

you must of shortened the rod.. all good just turn it the other way.. problemed solved =)