1g bearing issue

[sanchez]

Hey guys, I have an issue with sourcing the correct mains bearing for my gen 2 1g. The problem I'm having is that the main bearing towards the front of the motor has the guide on the left hand side but the bearing sets i've purchased have the guide on the right. I've looked at 3s bearing from ACL, 2s bearings from NDC but they both have the guides on the right.



I know that quite a few people on Toymods have rebuilt these motors but i haven't been able to find anyone with same issues i'm experiencing. I would like to avoid having to take the motor to a rebuilder for them to machine the guide on the right so any advice i can get would be appreciated.

[CraigD]

3sgte bearings are the same

http://www.aclperformance.com.au/Toy...TEBearings.htm

looking at that website there is 2 different part numbers for the bearings

[sanchez]

if that's the case, then what is the correct part number?

[Kedderz]

6boost I believe has used king bearings for a 4k motor. Dont konw the part number.

http://www.toymods.org.au/forums/sho...6&postcount=23

[love ke70]

4k bearings will be for the big ends, not the main.

sanchez, i dont know the part number but i might be able to find out, if i can find my left over bearings. i had no drama when i built my 1g with 3s bearings...
surely your bearing shop would know the difference between the two sets?

cheers, andy

[emp?]

i had this and so did mr shin (rip)
nothing 2min with the file didnt fix cutting a new slot into the cap