4AGE 16v Bigport Cooling setup?

[beauc]

Hey guys, had a quick search couldn't find what i need,
I have a 4age, 16v bigport bluetop motor, i bought it incomplete
and am in the process of putting it into my ke30, i am chasing
some diagrams or pictures to see what hoses i am missing from the motor,
also can i just use normal hoses that will do the job or should i try source
them from toyota? (probably not)





Thanks in advance, Sorry for my toyota noobness, i've come from Rotaries

[Casey-G]

not much help but you could probably find a car that the engine previously came from (levin 86 im not 100% sure im not a rear wheel drive chap myself) from this site: http://www.toyodiy.com/parts/
and then search for parts you are missing.

it really looks like you not missing much, apart from the green sensor on the end of the head on the rear end of the engine.


hope i helped a tiny weeny little bit


personally i think he should buy this smallport 4age i have sitting here at home and use that but eh... bloody ford drivers for you..

[mattysshop]

what exactly are you after?

does this help?

[mattysshop]

the heater hose you can't see in the pic, is the outlet hanging off the back of the engine with the green and brown sensor's in it (fyi your missing the green sensor on that housing! an AE82 one should be fine, there are 2 types, round corner and square corner.. it's just the plug on your loom.. the sensor is the same).. which is the 'out of the heater' the bottom heater hose off the water pump is your heater 'inlet'

hope that helps you

Mat