Reply With QuoteDo you have any pictures of your setup?
The circle on the right below is a sensor and the one on the left im not sure what u need to know about it.
The throttle body has two pipes which go into the small diameter pipe and the larger diameter pipe.
20valve thermostat
going to install the 20v in the ke70 very soon just need to sort something before it can be completed... I have the water relocation kit all bolted up and planning to use the external thermostat as in the pic (thanks witzel) I just want to sort out what to do with the two items circled in the pic. One is a water inlet/outlet i dont know what to connect it to and the other is some vacuum hose junction or something... can anyone tell me what to do with these? thanks
Last edited by spoon; 10-11-2010 at 01:15 PM.
Re: 20valve thermostat
Do you have any pictures of your setup?
The circle on the right below is a sensor and the one on the left im not sure what u need to know about it.
The throttle body has two pipes which go into the small diameter pipe and the larger diameter pipe.
KE30 4agte - Bullet - Rick Rolled
UZX83 1UZ W58- Cruiser - Tow Car - Fun Car
Originally Posted by -GT-
Re: 20valve thermostat
ill have to get pictures of my setup, but basically the fitting on the head is only the output and doesnt split into two like in the picture. So I dont know what I should be fitting onto the thermostat as there is no provision for this on the engine (that I know of!). The bottom circled bit has (from memory) about 4 outlets which all plug into thin hoses so i dont know if theyre sposed to connect to something important... maybe cold start sensors or something?
Posting Permissions
Bookmarks