Project RA28 & RA23 Car Info Stickers, Tyre placard, jack usage

[river]

Hi,

Tuning sticker for 18R-G engines. This is attached to the factory air-box over the carbs. There would be a similar one for the 2T-G engine series also.

seeyuzz
river

[parrot]

This is the one I have on the way

[auto351]

River
Is Parrot's sticker the same as 18R-G? I think it may be Japanese.
are you able to email ([email protected]) or post up the images you have?
if we can read them we wil be able to reporduce

that will give us 4 out of 7 sticker



The picture I posted which was hard to read , I have found it has a parts number 17792A and is listed is the RA28 parts manual page 32 Looks like "7M-GTE MX73" was correct just need to find on which can be read.

Manuel

[toyboyracer]

screw it..

[parrot]

Toyota call it an 'Engine caution plate'

My reading of the parts book is that

2TG 11293-88223

18RG 11293-88250

[o_man_ra23]

Roughly translated it reads "Ha ha you bought a Toyota ! "

Wow, you have just set a new standard on what could be considered the stupidest thing you have typed on this forum. Well done!!

[toyboyracer]

screw it..

[o_man_ra23]

Wow, you can use google translate. With the crap that often comes from your keyboard, it is hard to tell what is tongue in cheek and what you actually believe is true.

[sleeektoy]

The best JDM ones I have. Taken from Yahoo japan at some stage
18R-GU


Radiator


2T-G(GR)

[auto351]

The best JDM ones I have. Taken from Yahoo japan at some stage
18R-GU

This is a nice find, the radiator one looks like the brake boaster sticker.

[auto351]

I will assume it is Jap & not Chinese.
Will see if i can find fonts.

But the first I want to complete the RA23/28 stickers, before doing the 22 stuff.

River were you going to send over some images of the ones you have ?

[Toy77]

Tyre placard





Some of the fonts are wrong here too, will have a look around for something closer.
I think it’s worth spending a little extra time to get the font right, but as some one said some stickers are small and you would not notice the minor differences

Good work guys,
At this rate we should have the completed set in not time.

Jason (Bluemeanie) should I put you down for the emissions sticker?

I will keep a project overview of who has the project open in post one this way we can track any changes.

Hi mate,

I may have missed something in the pages.... but i thought that ra28 at least had 14in rims from factory... im sure my stockers were 14's?????

i'm sure one of the people here that is into originals can tell us if thats correct???

Cheers
Stew

[river]

Hi,

The 23/28 that were exported to Australia (and most other countries) had 14 inch rims.

However, they had 13 inch rims domestically.

I think 14s were an option for the domestic market, but 13s were the default. I'll check my EPC later to confirm.

seeyuzz
river

[auto351]

Here is my booster & York Toyota deliver sticker, there a bit OOF will photograph these in daylight





& try and get some usable photos but some of the wording is missing

I’m thinking with the dealer sticker I can get a few different one printed and include them in kit, you can use the one you want, there is a hand written number on the dealer sticker, not sure what it indicates



Would like to get all decals before printing,

[auto351]

Images from Owen - (o_man_ra23), thank you for helping out.
We now have the Full set.

Questions
Is there an RA28 jacking sticker?
does any one have the A/C sticker?
is the sticker River indicated was on the air box include below?

From RA28 - Tyre placard which is different from RA23 , including 14inch rims



From RA23 - You can see the embossing in this sticker must be made of foil?



From RA28 - Is this an Emissions sticker?



From RA28 - This must be the Tuning sticker?



There looks to be two tyre placards, I will draft up the second tyre placard.

Don’t know about the booster sticker will find out from the printers we did talk about printing on foil and it is possible but its more expensive then you have the embossing, but one of the numbers must be the serial number, if it is then is may not be possible to have
unique numbering