Wakefield Park Track Day - Friday March 20th!!

[-GT-]

And surely you're willing to pay a measly $60 for some +1 action, if it's really required??

Yep Brooks Rd, Ingleburn - bit after the M7/M5 4 lane bit, exit left, turn right at the roundabout, follow along for a couple of k's (parallel to the hume) till you get to the servo, just before you get back onto the highway.

I don't really understand how you can get lost, it's pretty straightforward. - only bit is you might think you're lost before you go far enough down after the right turn.

[Cuzzo]

- only bit is you might think you're lost before you go far enough down after the right turn.

Correct.

Ended up on the hume again and the next exit isnt for ages!

[JustenGT8]

Anyone bringing a pyrometer?

[ddeane]

Justen

Will a temp probe on my multimeter work?

Craig

[Cuzzo]

Hows everyone list going?

Left on mine is:

Fit turbo and dump
Fit exhaust
Fit Diff
Fit Tailshaft
Fluids and Bleed.

[De@No]

Another question about these GT are they usually held on a friday...or are any held on a thursday at all?

[MR22ZZ]

Justen

Will a temp probe on my multimeter work?

Craig

probably not, I think he's looking to measure tyre temps.

Justen, Jaycar? Option 1 or Option 2

Hows everyone list going?

Let on mine is:

Fit turbo and dump
Fit exhaust
Fit Diff
Fit Tailshaft
Fluids and Bleed.

That's still some good progress to get up to that point considering what you did.

Pulled my front brakes apart last night.
Will get everything back together tomorrow along with a bleed though.

[JustenGT8]

Yeah tyres temps so no good Craig, thanx anyways.

Buyer a pyrometer has been on my to do list but it's been way down the bottom lately.

Just got the car wheel aligned....not sure if it was the operator or the gear but getting that you would call hald accurate was near impossible? In the end i settled for near enough as my nerves couldn't take any more.

I reckon my new shed will have to have a laser leveled floor and i'll do my own in future.

Anyways, settled with 4 deg neg front left, 3.5 deg neg front right. Aimed for zero toe but looks like a bees dick +ve i think.

Rear was 2.2 deg neg left rear and who knows for right rear? machine read zero but to the eye it's dead on the same as the left...strut tops are set the same? anyways. aimed for 1.5mm toe in a side but ended up with 1-1.2mm

Seeing i have changed so much i'm not too fussed....see how it goes on the day and tweek from there. Time to start my little black track book

[X kyle X]

been sick so have missed 2 days of uni already, and still dont have my car back, not looking good....

[Cuzzo]

Were you going to come out for a few laps kyle?

[X kyle X]

i was KEEN AS MUSTARD to come down and meet a few more people and check it out, wasnt going to run just yet but it looks almost impossible now...

[RONA]

I won't be coming down to do any photos. Getting some work done on the Lexus so its ready for the nats instead.

[Cuzzo]

Its going to be a quiet old wakefield.

[MR22ZZ]

I'll bring my camera down to take some pics as I won't be running too many sessions.

[-GT-]

Justen, he really should be able to get more accurate than that, especially on the camber - he should be able to get within a couple of tenths; my guy normally adds 0.1-0.2 more on the near side to account for road camber.

Shouldn't be too quiet - there's 15 or 16 toymodders plus a couple of extra drivers. Deano, yep always fridays. We stay 2 nights, so it's only 1 day off work and you still get a weekend when you get home, and it's cheaper on a weekday than weekend.