AE92 Panel help

[tjb45]

Hi, I was just after some advise. Does anyone know if the front guards, bumper, bonnet and doors are the same between an AE92 hatch (non seca) and a AE92 sedan?

Thanks

[JP]

guards, bumper, bonnet, filler panel and front doors are the same between the same year toyota badged hatches and sedans. The nova's have different front guards, lights, bonnet, bumper etc, the toyota badged cars have different front guards, corner lamps and front bumper between the series 1 and series 2 models.

[LeeRoy]

No theyre not.

The seca and hatch have different bonnets 100%. Seca bonnet is flat across the front whereas the hatch one dips down to the grill in the middle.

The doors I think are also different as the glass in the front doors is not interchangable between hatch and seca.

[JP]

who's talking about seca's in this thread?

[tjb45]

Thanks for that, and were not talking about seca's.

So is it possible to swap a series 1 front end (bonnet, headlight, indicators, guards and bumper) onto a series 2

[JP]

yep. you just have to lengthen the indicator wires to reach up to the corner lamps. Make sure you get the loom plugs for the series 1 corner lamps too.