Looking for 1GGTE head bolts

[tomo1ggte]

Hey guys,
Im chasing a set (12 i think) of head bolts for a 1GGTE. Ive called toyota and been told its $9 per bolt and they will be a few days to arrive from sydney. Does anyone know where i could get a set off the shelf in Brisbane??
Cheers

[J0RD0]

been down this path, toyota is your only option unfortunately.

[Kedderz]

You can use 2jz ARP main studs for head studs, ARP # 203-5405, according to kyle (6boost).

I have discovered this week that the ARP head studs can be fitted without any machine work jamie, just drop them straight in. The only tricks needed are a deep 12mm 12 point socket, and you have to put the washers that go under the nuts on the head before you lower it down over the studs, or conversely, put the studs in through the washers after you've put the head on. I'd do option 1, takes all of 5 sec to put them in. Other than that, you don't need to do a thing. If anyone needs head or main studs, Jamie(Forcefed6) can suply them, I bought both my head and main studs from him, thanks jamie

As for rod bolts, I'm not sure. I didn't bother, I expect it to destroy the piston before the bolts, they are a fairly stout bit of kit as standard anyway.

http://www.toymods.org.au/forums/sho...84&postcount=4

[tomo1ggte]

cheers man i got told this recently but wasnt sure what had to be done. Will these have to be the same torque and sequence as standard head bolts??