3SGTE Head

[winnie_man]

I'm replacing my head gasket, whilst the head is of is there any thing I should be doing for maintenance/performance other then head studs? Keep it in the ballpark of around $500 give or take a few hundred.

[YGT04A]

water pump, timing belt, idler pully, metal head gasket

[jeffro ra28]

strip, clean and replace valve stem seals.

[twentyEight]

strip, clean, port and polish, and replace valve stem seals.

Agreed....

[BlitzRacing]

water pump, timing belt, idler pully, metal head gasket

I would do this if it hasnt been done in awhile..

and recon head if neccessary.


Depends on when the things were last done..