Results 1 to 3 of 3

Thread: 4AGZE boost upgrade

  1. #1
    KE25 legendary Backyard Mechanic Robbo's Avatar
    Join Date
    Jun 2006
    Location
    WA
    Posts
    216

    Default 4AGZE boost upgrade

    just imported myself an AE92 GT-Z gen1 1988.
    i believe to upgrade the boost is to fit an EA falcon aircon pulley as these are a direct bolt on so to speak.
    anyone shed some light on this theory?
    the car already has a decent exhaust, basically straight through...with just 2 resonators after the CAT.
    i do plan to enter 1 or 2 track days with this car...

    any other small upgrades for this engine?
    any help will be much appreciated,
    thanx, Rob
    !!! BAN LOW PERFORMANCE DRIVERS NOT HIGH PERFORMANCE CARS !!!

    私のトヨタはある従って速い均一死んだ人叫ぶ!

  2. #2
    ditty man Grease Monkey
    Join Date
    Jan 2006
    Location
    wa
    Posts
    162

    Default Re: 4AGZE boost upgrade

    there not bolt on, there is a fair bit of work to get them to fit, i beleive u need to make a sleive up as the falcon pulley centre is larger

    as long as u dont get a nevo your safe, nevos are very very very very bad for your bottom end as they are not harmonicly ballance. Iv seen a enough fucked gzes from nevos to prove this.

    there is a guy on this site who did this mod with success, search it up, i know its here.

  3. #3
    Your mum is a Conversion King TERRA Operative's Avatar
    Join Date
    Mar 2007
    Location
    Chiba
    Posts
    2,232

    Default Re: 4AGZE boost upgrade


Similar Threads

  1. 4AGZE into a TA22
    By Valkyrie in forum Engine & Driveline Conversions
    Replies: 23
    Last Post: 20-10-2010, 06:57 PM
  2. 4AGZE high idle but no boost leaks
    By .:2DR-FTU:. in forum Tech and Conversions
    Replies: 6
    Last Post: 20-05-2008, 03:48 PM
  3. Hybrid Boost Controller Installation
    By doobs in forum Tech and Conversions
    Replies: 13
    Last Post: 31-03-2007, 02:19 PM
  4. 4agze still not boosting properly
    By akmehd in forum Tech and Conversions
    Replies: 12
    Last Post: 06-12-2006, 12:16 PM
  5. Trying to wire up solenoid valve to boost controller?
    By trd-st162 in forum Tech and Conversions
    Replies: 7
    Last Post: 21-11-2006, 09:35 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •