Is this how to connect a EBC to 1JZ

[Gibbon]

Hi

I'm about to take delivery of a HKS EVC IV Boost Controller. I thought I would have a go at installing it myself.

This is what I've worked out - is this right?

Yellow - goes to wastegate
Blue - goes to Turbo outlet
Green - goes to an outlet that has boost / vacuum pressure



This is to just double check that I have the wastegate right.



There is a setting on the back of the unit "SW" or "PO" - SW is for single port, swing valve or internal type wastegate type. I have a internal wastegate - yes?

Once it's installed - is there something that needs to be done to remove the OEM one?

Thanks

[Hibba]

Yep the setup is right.
Internal Wastegate yep.
And so to speak there isnt a stock boost controler.

[robakka]

seems right to me
do u have to tee bother the turbo pressure ports together? or can u plumb one to the controller and block the other as they would both be running the same pressure
i'v never been able to find an answer

sorry to jump in on the thread