Page 3 of 3 FirstFirst 123
Results 31 to 44 of 44

Thread: Tein Suspension

  1. #31
    Current UZA80 owner Chief Engine Builder JustCallMeOrlando's Avatar
    Join Date
    Aug 2005
    Location
    Western Australia
    Posts
    4,152

    Default Re: Tein Suspension

    Thanks for the heads up Matt, those prices are very reasonable! They even go on the maybe list.

    They also stock the Tein Flex suspension which the guy from WA Suspensions said about as well. They sit in between the Super Street and the Mono Flex.

    This was his description:
    "Tein Type Flex. These have firmer spring rates and more aggressive valving in the shock absorbers. They come with Adjustable top mounts for maximum camber adjustment. Again, they are height and valve adjustable. These are not as nice on the street as they are slightly more track orientated. Cost of this kit is $2650 ex japan Mid October. (EDFC Compatible)"
    Teh UZA80 - Project Century - Remotely p00'd by association

  2. #32
    doctor ed Conversion King ed's Avatar
    Join Date
    Sep 2005
    Location
    Penrith BC
    Posts
    2,537

    Default Re: Tein Suspension

    lol @ track oriented... these things ARENT stiff, seriously. they just arent

    as for maximum camber adjustment... LOL... obviously knows his jza80's. i dare anyone to dial in camber on a dual A arm assembly with a shock strut
    ../delete/ban
    tech moderator
    E46 M3 Nürburgring Nordschleife - 8.38

  3. #33
    Current UZA80 owner Chief Engine Builder JustCallMeOrlando's Avatar
    Join Date
    Aug 2005
    Location
    Western Australia
    Posts
    4,152

    Default Re: Tein Suspension

    I know, I take everything I read with a pinch of salt. That said, they do seem like a good compromise personally. Stiffer than the Super Streets, yet cheaper than the Mono Flex. Compromise is everything, it's all well and good for me to say I want maximum track attack, but 99% of my driving will be around town.
    Teh UZA80 - Project Century - Remotely p00'd by association

  4. #34
    doctor ed Conversion King ed's Avatar
    Join Date
    Sep 2005
    Location
    Penrith BC
    Posts
    2,537

    Default Re: Tein Suspension

    *hint* drive a car with some *hint*
    ../delete/ban
    tech moderator
    E46 M3 Nürburgring Nordschleife - 8.38

  5. #35
    Current UZA80 owner Chief Engine Builder JustCallMeOrlando's Avatar
    Join Date
    Aug 2005
    Location
    Western Australia
    Posts
    4,152

    Default Re: Tein Suspension

    Anyone in Perth have a car to lend me?
    Teh UZA80 - Project Century - Remotely p00'd by association

  6. #36
    Forum Sponsor Conversion King
    Join Date
    Dec 2006
    Location
    NSW
    Posts
    2,583

    Default Re: Tein Suspension

    Quote Originally Posted by ed_jza80
    *hint* drive a car with some *hint*
    agreed,
    a set of TEIN FLEX on there soft setting are fine for street use, then when you get to the track change the valving to a stiffer rate.

    cheers
    linden

  7. #37
    Current UZA80 owner Chief Engine Builder JustCallMeOrlando's Avatar
    Join Date
    Aug 2005
    Location
    Western Australia
    Posts
    4,152

    Default Re: Tein Suspension

    I'm sure I can nab a drive of a car with Super Streets, the dude from WA Suspensions has an R33 equipped with them, I'm not sure I have anyone I know with a JZA80 with Super Streets.
    Teh UZA80 - Project Century - Remotely p00'd by association

  8. #38
    Current UZA80 owner Chief Engine Builder JustCallMeOrlando's Avatar
    Join Date
    Aug 2005
    Location
    Western Australia
    Posts
    4,152

    Default Re: Tein Suspension

    I'm going to go for a drive in a Super Street equipped car, that said, the WA govt. has sort of forced my hand. Looks like the part Linden was mentioning will cause me issues in my crusade for legality.

    "The Super Street will pass licensing no problems. The Mono Flex, or Type Flex will not get approval for road use. The reason for this is the Flex kits have spring seat adjustability as well as adjustable cleat brackets. No kit on the market with adjustable cleat brackets will get approved whether it be Tein, D2, Hot Bits, HKS etc etc. Just food for thought for you."

    I think I'll probably end up using the Super Street as my base, and work from there if I'm happy with them after the test drive.
    Teh UZA80 - Project Century - Remotely p00'd by association

  9. #39
    Junior Member Carport Converter OnAll-FOUR's Avatar
    Join Date
    Jan 2006
    Location
    NSW
    Posts
    1,608

    Default Re: Tein Suspension

    I have the tien SS with EDFC on my GT4 and I have been really happy with them. I know they might be different for the Supra but I assume Tien would have tried to set them up for a similar market.

    When I first drove on them I was a little worried that they may be a little too soft. However I have found that in dry conditions the damping may be a little too stiff as it can just make the tyres slide over the surface. When I backed off the damping (with the EDFC) and went back through the same road again and I found there was more grip there. This is even more pronounced in the wet. Maybe there is something else in the setup influencing this effect, I'm not sure. I'm going to wakefield with them next Friday so well see what they are like on the track.

    You do tend to jiggle around quite a bit on the hardest setting, however on the softest it is an enjoyable ride even on eastern Sydney's 200 year old roads.

    If your after the ability to adjust both damping and the rebound independently then the tien ss wont give you that. the adjustment is only on the damping force. The softest setting gives equal damping to rebound. the hardest setting increases the damping force while leaving the rebound the same.
    Ben #400 - My Ride Thread - Now with CT20b -
    1990 ST185 JDM, 103.0kws July 06 --> 155.9kws Feb 2010
    WSID: [email protected] (Weak ) : Wakefield 1:16.1 Racechrono
    Pics - http://photobucket.com Vids - http://www.youtube.com

  10. #40
    Current UZA80 owner Chief Engine Builder JustCallMeOrlando's Avatar
    Join Date
    Aug 2005
    Location
    Western Australia
    Posts
    4,152

    Default Re: Tein Suspension

    I spoke to the dude from WA Suspensions so I've got prices for revalving them and new springs should down the track I want to modify them.
    Teh UZA80 - Project Century - Remotely p00'd by association

  11. #41
    Current UZA80 owner Chief Engine Builder JustCallMeOrlando's Avatar
    Join Date
    Aug 2005
    Location
    Western Australia
    Posts
    4,152

    Default Re: Tein Suspension

    Random dilemma. Ordered coilovers yesterday through Perfect Run. TEIN have gotten back to them saying they're not sure the GST60-B1SS3 Super Streets I selected are compatible with the SZ because they've never tested them, only on an RZ.

    Are they any differences I should be aware of or are they just being careful?
    Teh UZA80 - Project Century - Remotely p00'd by association

  12. #42
    The Supreme Backyard Mechanic
    Join Date
    Dec 2005
    Location
    NSW
    Posts
    421

    Default Re: Tein Suspension

    nope, should fit both.... There should be no differences at all....

    I think they're worried about TEMS... something i'm sure you don't have....

  13. #43
    I make people cry Chief Engine Builder Draven's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    4,281

    Default Re: Tein Suspension

    after all the initial debate, I can now say the mono-flex are quite streetable. on really shithouse roads it's not pleasant, but oin your average, moderately shithouse sydney road it's completely bearable.
    http://www.toymods.org.au/forums/showthread.php?t=7465
    Quote Originally Posted by xero View Post
    and of course campbell newman's completely fucking everything he touches so badly that he should be called dick fingers.

  14. #44
    Current UZA80 owner Chief Engine Builder JustCallMeOrlando's Avatar
    Join Date
    Aug 2005
    Location
    Western Australia
    Posts
    4,152

    Default Re: Tein Suspension

    Haha, had they been legal here I may have actually picked them, I always take marketing spiel with a pinch of salt, but alas Super Streets were the only legal TEIN option for me. If they require a little revalving or high spring rates down the track so be it.
    Teh UZA80 - Project Century - Remotely p00'd by association

Similar Threads

  1. Suspension for dummies
    By Lambolica in forum Tech and Conversions
    Replies: 12
    Last Post: 13-09-2007, 08:38 PM
  2. Replies: 8
    Last Post: 09-09-2006, 11:32 AM
  3. Your suspension & you...
    By Smokey228 in forum Tech and Conversions
    Replies: 12
    Last Post: 23-05-2006, 08:41 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •