Page 3 of 4 FirstFirst 1234 LastLast
Results 31 to 45 of 47

Thread: xA Series engine Variants

  1. #31
    Forum Member
    Join Date
    Nov 2011
    Location
    EU
    Posts
    2

    Default Re: xA Series engine Variants

    Twincharged Ae82 4agzte


    KM = PS :-)

    Engine model and generation: 4agze from AE101 levin gt-z (so smallport. last gen)

    Top End Modifications: standard

    Bottom end modifications: standard

    Forced induction: Yes, SC12 supercharger + TD05 turbvocharger from evo X (TD05H-152G6-12T), 1,2b, supercharger turnes off before 6k rpm

    Management: EMU SA

    Fuel used: Pb 98, Pb 100

    Intake: Custom intake manifold

    Exhaust: 2,5"

    Driveline: E58 LSD transmission

  2. #32
    Forum Member
    Join Date
    Feb 2013
    Location
    RM
    Posts
    1

    Default Re: xA Series engine Variants

    Carbed, N/A, nothing really too fancy in the build.









    Spec list:
    - Wiseco high compression pistons
    - Stock rods with ARP bolts
    - HKS 272 cams, stock valvetrain
    - Stock crank
    - Midly ported bigport head
    - Weber DCOE 45
    - "TRD-like" exhaust manifold

  3. #33
    Genuine Hotty. Conversion King old_mr2's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    2,160

    Default Re: xA Series engine Variants

    Bigport GZE (OEM Rebuild)
    Turbosmart PB BOV
    Turbosmart Boost Controller
    Adaptronic Select 440
    7MGTE injectors
    AE101 CAS
    Bosch Coils
    NA inlet manifold

    Garrett 2560r
    Just Jap A2A cooler
    NitroDann Log manifold
    NitroDann 3.0 Dump/Exhaust

  4. #34
    Genuine Hotty. Conversion King old_mr2's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    2,160

    Default Re: xA Series engine Variants

    http://i.imgur.com/2D0VBKh.png
    4agze Bigport 8.0:1 (OEM Rebuild)
    Bosch coilpacks
    440cc injectors
    Adaptronic 440 Select

    Just Jap a2a intercooler
    gt2560r
    NitroDann log manifold
    NitroDann 3.0" Dump and Exhaust

  5. #35
    Forum Member 1st year Apprentice
    Join Date
    Jan 2013
    Location
    Netherlands
    Posts
    11

    Default Re: xA Series engine Variants




    POWER: 89 Wheel Kw

    CAR: Toyota Celica ST (1998)
    ENGINE: 4AGE 20V Blacktop
    BOTTOM END: Stock
    TOP END: polished exhaust chambers
    EXHAUST: Stock 1.5" downpipe
    Stock 2.5" Catalytic convertor
    Stock 1.7" centre exhaust section
    Stock 1.5" rear exhaust section
    INTAKE: Ramair open air intake
    NOTES: Engine did only 2700 km after the complete rebuild

  6. #36
    Forum Member 1st year Apprentice
    Join Date
    Sep 2012
    Location
    Arizona
    Posts
    11

    Default Re: xA Series engine Variants



    Engine:
    Aw11 4agze

    Top end:
    Stock rebuilt top

    Bottom end:
    Stock rebuilt bottom

    Forced induction:
    Sc14 supercharger from a toyota previa

    Mangement:
    Stock ecu from an automatic usdm, areomotive fuel pressure riser

    Fuel used:
    Qt gas station 91 octane.

    Intake:
    Custom intake piping, Throttle body from a camry v6, wta setup from a celica st165, n/a big port intake modified inlet port to center facing tvis plate removed.

    Exhaust:
    Stock exhaust manifold to stock resrictive exhaust piping on the car.

    Drivetrain:
    AE95 corolla all-trac wagon. Automatic transmission.
    Check out my ae95 4agze sc14 build. http://www.alltracwagon.net/forum/m-1347147405/ or check out the ride info at http://www.toymods.org.au/forums/for...agze-sc14.html

  7. #37
    KE20XX Grease Monkey charade_16v's Avatar
    Join Date
    Jul 2007
    Location
    NSW
    Posts
    133

    Default Re: xA Series engine Variants

    Car:
    Ke20 Corolla

    Engine model and generation:
    4agze bigport (AW11) unopened

    Performance:
    182.9kW/315.8Nm @ 10psi - [email protected] best so far
    Tuned by Silverwater Automotive (SAS)

    Top End Modifications:
    Nil

    Bottom end modifications:
    Nil

    Forced induction:
    Garrett GT3076r

    Management:
    Megasquirt MS3-Pro

    Intake:
    Standard 4a RWD manifold

    Exhaust:
    6boost Manifold, 3" turbo-back, wastegate plumbed-back, 200ci cat, 1x resonator, 1x muffler

    Driveline:
    Custom NPC Clutch, W58 supra box with short shifter, Hilux LSD Diff

  8. #38
    Toymods Events Secretary Too Much Toyota trdee's Avatar
    Join Date
    Jul 2007
    Location
    NSW
    Posts
    10,175

    Default Re: xA Series engine Variants

    Car: AW11

    Engine model and generation: 4A-GE 20v Silvertop. Stock unopened motor

    Top End Modifications: standard

    Bottom end modifications: standard

    Forced induction: No

    Management: Adaptronic 440 Select

    Fuel used: 98 octane

    Intake: T3 75mm trumpets

    Exhaust: Standard

    Driveline: C52

    Last edited by trdee; 09-02-2015 at 03:31 PM.
    1988 AW11 9A-GTE - project #1 | 1984 MA61 1JZ-GTE - project #2
    Quote Originally Posted by Rex_Kelway View Post
    .....and the within first laps everything that made the AW11 great hit Rex as if the 'Gods of driving fun' had all Jizzed on his face.....
    Quote Originally Posted by JustenGT8 View Post
    Mono blocs mate....as close to yours as a Ferrari is to a Fiesta

  9. #39
    Junior Member Grease Monkey
    Join Date
    Mar 2012
    Location
    Qld
    Posts
    141

    Default Re: xA Series engine Variants



    5psi from SC14 at idle, 25psi from GT2860RS at 3500+
    Est 300-350hp at engine (Never Dynoed)

    Engine model and generation:
    AE92 4AGZE - Smallport

    Top End Modifications:
    Cometic Gasket, ARP studs

    Bottom end modifications:
    Standard

    Management:
    Razorbackecu

    Fuel used
    98 octane

    Intake:
    Open

    Exhaust:
    2.5in with cat and muffler

    Driveline:
    W55
    NPC clutch
    Stock T Diff

  10. #40
    Junior Member Grease Monkey
    Join Date
    Mar 2012
    Location
    Qld
    Posts
    141

    Default Re: xA Series engine Variants



    Dead stock small port 4AGE
    Factory AE86 exhaust manifold
    Razorback ecu

    111hp at wheels.

  11. #41
    Junior Member Grease Monkey
    Join Date
    Mar 2012
    Location
    Qld
    Posts
    141

    Default Re: xA Series engine Variants



    277HP @ 23psi (98) with GT2860RS, 310hp @ 18psi (E85) with GT2871
    No power under 5000

    AE92 4AGE
    280' Cams
    Cometic Gasket, ARP studs
    Spool rods, Arias Pistons (0.5mm over)
    Balanced
    Custom intake with XF falcon TB
    450x300x75 cooler iwth 2.5in pipes
    550cc injectors with 60psi base fuel pressure
    Razorback ECU and Daewoo coilpack
    Bosch 044 pump
    Cast ebay manifold
    2.5in mandrel exhaust with cat and muffer.

  12. #42
    Junior Member Grease Monkey
    Join Date
    Mar 2012
    Location
    Qld
    Posts
    141

    Default Re: xA Series engine Variants



    290hp @ 22psi

    AE101 4AGZE
    Mild head porting
    264' cams
    Cometic gasket, ARP studs
    Wiseco pistons on eagle rods
    Unknown 500hp turbo on cast manifold
    550cc injectors and high fuel pressure
    Razorback ECU and Daewoo coilpack
    W55 box
    T diff (locked)

  13. #43
    Junior Member Grease Monkey
    Join Date
    Mar 2012
    Location
    Qld
    Posts
    141

    Default Re: xA Series engine Variants



    134hp with cracked piston (died on dyno)
    AE92 4AGZE
    Stock cept SC14 with XF TB and Nevo 175cm pulley
    15psi
    TRD copy extractors
    2.5in exhaust with cat and muffler
    Razorback ECU and Daewoo coilpack

  14. #44
    Junior Member Grease Monkey
    Join Date
    Mar 2012
    Location
    Qld
    Posts
    141

    Default Re: xA Series engine Variants

    193hp
    Stock AE92 4AGZE with Rotrex supercharger, 18psi peak (at 6200)
    Razorback ECU with Daewoo coilpack
    In kit car (with T50 and T diff)

  15. #45
    Olde mechanic Carport Converter oldeskewltoy's Avatar
    Join Date
    Oct 2006
    Location
    oregon
    Posts
    1,363

    Default Re: xA Series engine Variants

    Quote Originally Posted by samkaos View Post

    290hp @ 22psi

    AE101 4AGZE
    Mild head porting
    264' cams
    Cometic gasket, ARP studs
    Wiseco pistons on eagle rods
    Unknown 500hp turbo on cast manifold
    550cc injectors and high fuel pressure
    Razorback ECU and Daewoo coilpack
    W55 box
    T diff (locked)
    Which Eagle rod? Last I checked Eagle didn't make 4AGE rods........
    Information is POWER... learn the facts!!

Similar Threads

  1. Toyota R Engine History
    By river in forum Tech and Conversions
    Replies: 65
    Last Post: 02-12-2011, 08:41 PM
  2. MA70 --> JZA70 Conversion
    By Lambolica in forum Engine & Driveline Conversions
    Replies: 119
    Last Post: 09-09-2007, 07:39 PM
  3. ST162 - Installing Series 1 rear struts into a Series 2
    By RobST162 in forum Tech and Conversions
    Replies: 4
    Last Post: 26-10-2006, 11:51 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •