knock sensing

**MADcunz** · 22-05-2007, 05:06 PM

Just wondering what the more experienced tuners on the site are using for knock detection and afr metering.

Im using an innovative LC-1 wideband sensor, but im not sure where to go for knock detection. Ive seen some people using the knocklink brand, not sure where to get these and what other peoples opionions are. Thanks in advance

Daniel

**Jasper** · 22-05-2007, 06:30 PM

There is some discussion about knock detection here

**MADcunz** · 22-05-2007, 11:15 PM

cheers for that Jasper, some very good discussion there

**thechuckster** · 23-05-2007, 12:07 AM

http://www.viatrack.ca/

Canadian made but is used by some kegasquirt folks plus other DIY EFIers.

I think Chris was using this?

Guy who developed it is also a turbobrick (volvo) fan.

**MADcunz** · 23-05-2007, 12:48 AM

http://www.turboxs.com.au/product.php?id=21 anyone used these before?

**jezza323** · 23-05-2007, 09:56 AM

knocklink is made by Link

website is HERE

**chris davey** · 23-05-2007, 03:36 PM

As Charles said, I use the Knocksense. It is good so far but as it is adjustable (and I believe they should be) you have to set it so that there is actually knock and not engine noise which can be difficult. See the other thread Jasper linked to for more details on that side of things.