need 3sge ECU pinouts

[XR Pilot]

This is for a gen 1 3SGE, its clearer to read than the above site. Hope it helps, this isn't an easy diagram to find

EDIT: I also have the full wiring BGB for the ST162, showing what relays connect where, ignitor wiring etc. If its any help I can scan it, remember its gen 1 though not 2.

[EldarO]

it aint that hard to find, ive already got it

although it doesnt suite, i think thats a pinout for a celica ECU.

the MR2 has the starter pin where "OX1" is shown on that diagram...

this is getting to be a pain in the ass! so it obviously aint a Gen 1 motor, as the diagrams are different, i also remember the third connecter (with battery/starter etc) being a 22 pin plug, in that diagram, its a 24.

ARGH!

Elmo.

[XR Pilot]

Well it was hard to get when I needed it in a hurry, as the site hosting it had shut down. Thankfully I managed to find it when st162.com came back online.

What if you put up a thread asking if anyone had the MR2 wiring BGB? If you could get a scan from it that should have the ECU pinouts in it.

[Kebin]

Heres another site buts its gen 2-4 and its in Japanese... not that easy to understand
http://gtfour.supras.org.nz/diagrams.htm

i think this is gen 3... handwritten translated
http://images.photomania.com/89099/1/radCB865.jpg
http://images.photomania.com/89099/1/rad153BB.jpg

[EldarO]

excellent! should be just what i need!

gonna have another crack at it one of these upcoming dayz, ill let yas know how it goes!

cheers for all the help!

Elmo.

[AndyTTR]

There used to be a link to a big pdf file with heaps of ecu wiring diagrams on the homepage of the old forums, i vaguely remember using it for my conversion... Might have a gen 2 wiring diagram here somewhere, will have a poke around.

[AndyTTR]

Does this help at all?
http://img.photobucket.com/albums/v6..._pinouts-1.jpg

Found it on Toyota Owner's Club UK forums. They reckon its for a Gen 2 out of an ST182, so the chassis plug is probably different?

[EldarO]

Andy my boy you've just found exactly what i need!

rep coming your way!

thats the exact diagram i need, as ive managed to map out half of the wires!

omgwtfbbq!

Cheers mate!

Elmo.

[AndyTTR]

haha, np man. Good luck with the project!

[EldarO]

yeah, its got "Greddy/Trust" *stamped* (not stickered ) over most of the engine bay, added to the coilovers, no exhaust, and semi slicks, im keen for a ride in it when i get it going!

Elmo.