Page 4 of 8 FirstFirst ... 23456 ... LastLast
Results 46 to 60 of 113

Thread: Recommendations for a GOOD 3" muffler to shut up 1JZGTE

  1. #46
    sir Grease Monkey
    Join Date
    Oct 2006
    Location
    tasmania
    Posts
    160

    Default Re: Recommendations for a GOOD 3" muffler to shut up 1JZGTE

    i fabricate any size muffler you want out of stainless 1.2-2 mm . common size is125 mm round and 450mm long they sound wicked and last forever .i have one on my 1jz hilux and everyone wants their bus to sound like it.if they are mounted as far forward as possible preferably on the end of your dump pipe no other mufflers are reqd. $200 freight included [unpolished]

  2. #47
    ---------HO00NS---------- Chief Engine Builder IN 05 NT's Avatar
    Join Date
    Dec 2005
    Location
    nsw
    Posts
    3,495

    Default Re: Recommendations for a GOOD 3" muffler to shut up 1JZGTE

    Quote Originally Posted by shinybluesteel
    did it cost ou power? what is the model of it, can you see right down the centre?
    hey mate, is the luket RACE series, center/center design straight thru, yes you can see thru it......

    power diff?....not that i can tell....its just a stocko mx83...

  3. #48
    Show Us Your Tints Carport Converter Soarer_D00D's Avatar
    Join Date
    Dec 2005
    Location
    NSW
    Posts
    1,330

    Default Re: Recommendations for a GOOD 3" muffler to shut up 1JZGTE

    I have a full 3" Trust exhaust, with a high flow 3" cat, and its very quite on idle, and has a very smooth nice sounding tone to it when the car is driving, no droning at all, very jap style 1jz sounding. Under full boost whene the gate opens, sounds a bit louder tho.

    But a very nice system.
    Quote Originally Posted by eeeyan View Post
    yeah jump start a planet sort of torque



  4. #49
    -Street Drag Machine- Grease Monkey renxun's Avatar
    Join Date
    Jan 2007
    Location
    Sabah
    Posts
    160

    Default Re: Recommendations for a GOOD 3" muffler to shut up 1JZGTE

    although im running on 3.5" exhaust i guess i could share my bits too...

    running on straight piping with only a RSR Nvidia muffler... silent mode all the time .. only hears my engine fan running and the turbo spooling
    Drift Drift Drift and drift untill getting high fever...

  5. #50
    Toymods Club Member Domestic Engineer Danners's Avatar
    Join Date
    Dec 2005
    Location
    NSW
    Posts
    782

    Default Re: Recommendations for a GOOD 3" muffler to shut up 1JZGTE

    Rehashing an old thread here, but i'm actually wanting to make my car LOUDER! I'm using the same exhaust system that I had with the 7M in. Now that the 1J is in, i've noticed that it doesn't have that high rpm growl that most 1J's seem to have.... and i want it

    I took it down to my local zorst shop on the weekend and had my hotdog removed and it made no difference at all. I suspect its the muffler.

    The exhaust setup is 2.5" ebay twin dumps into 3" mild steel. 3" high flow cat and 3" no-name oval offset in, centre out muffler.

    Anyone got any videos of their cars so that i can check the exhaust note?
    Last edited by Danners; 16-07-2007 at 12:42 PM.
    Dan

  6. #51
    www.malicious.com.au Automotive Encyclopaedia ReQuieM's Avatar
    Join Date
    Dec 2005
    Location
    Vic
    Posts
    1,247

    Default Re: Recommendations for a GOOD 3" muffler to shut up 1JZGTE

    go a cannon. Or if you want MOTO loud get a blitz nur spec like mine. It'd fkn break your ear drums! lol

    You want thin metal and a small walled cannon.
    Malicious

    Illustration, Design, etc... www.malicious.com.au

    RIP James Nicol (ViPeR_NiPPleX)...

  7. #52
    www.malicious.com.au Automotive Encyclopaedia ReQuieM's Avatar
    Join Date
    Dec 2005
    Location
    Vic
    Posts
    1,247

    Default Re: Recommendations for a GOOD 3" muffler to shut up 1JZGTE

    I wanna shut mine up, on a side note. Thinking a full new zorst might be in order... when I can be bothered paying for it.
    Malicious

    Illustration, Design, etc... www.malicious.com.au

    RIP James Nicol (ViPeR_NiPPleX)...

  8. #53
    Welcome to the Darkside! Automotive Encyclopaedia -==L=a=N=c=E==-'s Avatar
    Join Date
    Nov 2005
    Location
    Rosewood
    Posts
    1,004

    Default Re: Recommendations for a GOOD 3" muffler to shut up 1JZGTE

    Quote Originally Posted by Danners
    <<snip>>
    The exhaust setup is 2.5" ebay twin dumps into 3" mild steel. 3" high flow cat and 3" no-name oval offset in, centre out muffler.

    <<snip>>

    The offset muffler would be the reason, you need something straight though. Cannon, or very large non-offset oval muffler.

    Lukey 3" Turbo muffler comes to mind.

  9. #54
    Toymods Club Member Domestic Engineer Danners's Avatar
    Join Date
    Dec 2005
    Location
    NSW
    Posts
    782

    Default Re: Recommendations for a GOOD 3" muffler to shut up 1JZGTE

    I hate the look of cannon's and would much prefer an oval muffler. I was just looking at the magnaflow website... anyone had experience with them?

    I'll go check out the Lukey turbo now. Thanks Lance!
    Dan

  10. #55
    regular fella Conversion King chris davey's Avatar
    Join Date
    Oct 2005
    Location
    QLD
    Posts
    2,608

    Default Re: Recommendations for a GOOD 3" muffler to shut up 1JZGTE

    probably won't help but here is a vid of mine
    http://www.youtube.com/watch?v=Irga3KD7cp0

    3" dump pipe, decat, no muffler
    Quote Originally Posted by MR 1JZ View Post
    that interior is so jap...just looking at it makes me want to kill a whale
    QUICKEST 1JZ'S IN OZ

  11. #56
    Toymods Club Member Domestic Engineer Danners's Avatar
    Join Date
    Dec 2005
    Location
    NSW
    Posts
    782

    Default Re: Recommendations for a GOOD 3" muffler to shut up 1JZGTE

    Thats the growl i'm after... got any videos of it with a muffler?
    Dan

  12. #57
    -Street Drag Machine- Grease Monkey renxun's Avatar
    Join Date
    Jan 2007
    Location
    Sabah
    Posts
    160

    Default Re: Recommendations for a GOOD 3" muffler to shut up 1JZGTE

    just get any straight flow muffler of your likings , hammer out the silencer and replace it with straight pipe without any holes in... there you will have a muffler and the growl of no muffler
    Drift Drift Drift and drift untill getting high fever...

  13. #58
    regular fella Conversion King chris davey's Avatar
    Join Date
    Oct 2005
    Location
    QLD
    Posts
    2,608

    Default Re: Recommendations for a GOOD 3" muffler to shut up 1JZGTE

    With normal 3" straight through muffler you can barely hear it. That is why i have it removable. Even with no muffler I can't hear my car over noisy v8's at the drags. Check my youtube account for vids. I can't remember what I have up there. May be an incar vid with muffler from ages ago. 13.5@115 I think it is.
    Quote Originally Posted by MR 1JZ View Post
    that interior is so jap...just looking at it makes me want to kill a whale
    QUICKEST 1JZ'S IN OZ

  14. #59
    :O Conversion King JZA70 R's Avatar
    Join Date
    Nov 2005
    Location
    Western Australia
    Posts
    2,856

    Default Re: Recommendations for a GOOD 3" muffler to shut up 1JZGTE

    Quote Originally Posted by -==L=a=N=c=E==-
    The offset muffler would be the reason.
    Seconded. They do wonders for making 1J's quiet.
    JZA70|R / 12.45 @ 111 mph.

  15. #60
    Junior Member Domestic Engineer Karma Supra's Avatar
    Join Date
    Dec 2005
    Location
    Oxfordshire
    Posts
    529

    Default Re: Recommendations for a GOOD 3" muffler to shut up 1JZGTE

    Mild steal systems FTW! Mild steal has better resonance properties, my car has an HKS hyper mufler on it, it sounds nice, but not overpowering, its smooth and easy on the ears, just perfect. Not a huge fan of the jap cannon on the back though...

    Some kind of BMW
    '97 Hilux Surf SSR-X LTD
    ..::VVTi 1UZ-FE::..

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •