KE55 Torque Settings - URGENT

[PRPL55]

hey

just need to find out the torque settings for a ke55 the rocker cover/ head cover on the engine...thanks for answers or to anyone who can point me in the right direction
cheers.

[oldcorollas]

just enough.... buggerall... take your pic

you just need to tighten enough to get a little but if crush on the rubbers under the nuts, and the rubber around the rocker cover.
unless you have an itty bitty torque wrench, you might find it hard to torque them to spec as such..

a tiny smear of silicon, and a clean surface, can do wonders for sealing of the rubber gasket.