EFI fuel tank for RA 60

[Draven]

the ra65 tank bolts in to the ma61 (that's what mine had in it), so ma61 will bolt straight up too

[Wezelton]

I've put my ra65 tank into my ra60, now you will have two troubles..

1 - Fuel pump power, relay ect.

2 - Im 99% certain the fuel guage wont work on the 60 dash.

What i did was swap my entire ra65 body loom into my current ra60. So i've basicly taken out any need to wire up stuff.. My 22re will be up for grabs very soon with the engine loom, i might be able to take out the body loom. but cant say just yet.

Wes.

[wilbo666]

I've put my ra65 tank into my ra60, now you will have two troubles..

1 - Fuel pump power, relay ect.

2 - Im 99% certain the fuel guage wont work on the 60 dash.

What i did was swap my entire ra65 body loom into my current ra60. So i've basicly taken out any need to wire up stuff.. My 22re will be up for grabs very soon with the engine loom, i might be able to take out the body loom. but cant say just yet.

Wes.

Fuel pump power....depending on the engine he is going for he will use a COR or the output from the ECU...either way, not hard! And def don't need the whole body loom

I'm under the impression that the fuel gagues are the same....(MA61 vs RA6x isn't due to the digi dash...but RA60 and RA65 are pretty well the same dash...)

Cheers
Wilbo

[Norbie]

Yeah I'd be pretty surprised if the fuel level senders are different, but if they are it's a very easy job to swap them when the tank is out.

[turmite]

Thanx for the heads up! Swapped Wilbo one for a carton of lubricant. I may now afford for enough vaaline to get the 1ggte in LOL
Geoff

[Stefan]

Wilbo man, if you were a chick id kiss you.

wilbo loves teh cock ... you can kiss him

Swapped Wilbo one for a carton of lubricant.

Don't think he meant beer, either