Reply With Quoteuse a translator, like google or babelfish, or just good old perseverance, to translate the foreign language sites
Connections for Telgas 5000 Gas Computer
Hi, I am wanting to fit a Stefanelli Telgas 5000 Simplex gas stepper computer to my LPG V6 camry and I need the pinout connections to the black box.
I think they are +12V earth O2 sensor and one other maybe O2 return.
Wires are ALL Black
All the internet sites are in foreign language and no one in Australia advertises any technical data.
The lead from the computer to the gas control stepper motor is fine.
There is also a small preset adjuster in the black box marked REG TPS which will be an idle adjust or something like that.
All enquiries answered thanks
1968 RT40S Corona 1600S series II (restore in progress)
1973 RT104-MQFG 012604 Corona GT JDM (Owned since 1976 242000 km)
1989 ST185-BLMVZ-0007199 Celica GT4 JDM (unmolested classic 95000 km)
2012 ZN-6 86GT (shed find 5000 km in 6 years)
Re: Connections for Telgas 5000 Gas Computer
use a translator, like google or babelfish, or just good old perseverance, to translate the foreign language sites
"I'm a Teaspoon, not a mechanic"
"There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)
AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!
Re: Connections for Telgas 5000 Gas Computer
rt
its possible that the two wires may be for dual o2 sensors OR its a loop
my LPG computer has two wires, for dual O2, not loop
try with one wire and see if stepper operates (bare bit of O2 wire and tap into it)
otherwise run one in one out to the sensor.
Posting Permissions
Bookmarks