[Guide] Corona/Peugot/Hilux Conversion with Height Adjustable Coilovers [56k DIAF]

[roadkill]

yeah i beleive landcruiser 60 to 70 series calipers are s12+8 and are 90mm spacin, altho they have the different sized pistons. lol the arse just fell outta the ln106 caliper market.

Hi,

s12+8=different size pistons. S12=same size.

bEn

[old_school_jap1]

my ln106-style calipers (my bro says he took them off a 4runner) are stamped s12w

[The Real Roadrunner]

Hello,

Still keen on these discs, just not heard back from you.
Please let me know ASAP.

Kind regards,
Michael

2 pairs of them sitting next to my desk,

$104 + postage each rotor. these aren't slotted but it could be arranged if needed.

if you need then machined down also let me know and i can organise it from my end so you can have them ready to bolt on.

cheers
linden

[SeptemberSquall]

hey dude
while i was waiting i've chased up another option
thanks for looking into it but ultimately had to move quicker than this was happening

[Sagluren]

hey linden what rotors are they, i might be interested???
send me a pm.

cheers sam

[The Real Roadrunner]

dba272 (they are actually made by brembo), same as in the first couple of posts by takai.

ive used the same rotors on 4 CPH setups b4 so i know they fit after being machined to the correct OD.

only have 2pr's atm but i can get them whenever ppl want them just need a couple of weeks notice (worst case)

cheers
linden

[Sagluren]

cheers linden, if you can get them whenever i will most likely order some threw you when the time comes,

cheers.

[old_school_jap1]

i bought 2 coilover sleeves today from wholesale suspension and i told the dude that i needed 2" or 51mm inner diameter sleeves. i measured what he gave me and they are 50mm inner diameter. do you have to remove the paint from the struts before u put them on or something or has he given me the wrong thing?

[jeffro ra28]

i dare say once you strip the struts back they will be slightly smaller. Also, you can put the aluminium sleaves in the oven to heat them up and expand them to fit over the strut.

[Smokey228]

How much did you pick them up for old skool? I got quoted from the manufacturer of the Noltec ones (Noltec dont do them anymore) 360$ for sleeve, seat and hat, but no spring...
T3 want 260$ from the US for sleeve seat and hat but not sure if that comes with a spring or not...

What did you pay and what did it included?

Cheers,
Jase

EDIT: If you stick the tube in ice water and the sleeve in boiling water in the oven, you should be able to slip it over pretty smoothly...

Im pretty sure thats how Takai says he did it in the early pages!

[old_school_jap1]

i payed $240 for the sleeves and bottom perches

[Smokey228]

So no upper seat? What do you intend to use in place of that..?

I just got a quote of 350$ for sleeve, lower seat, locking ring and upper seat...

Cheers,
Jase

[old_school_jap1]

i'm gonna use t3 camber tops so i'll take them to wholesale suspension to make sure i get a top hat that fits with them. i've read of people havin issues with top hat colliding with camber tops

[SillyCarS]

i have cusco camber tops in my '23

no issues with fowling as they were made for the ra25

[Smokey228]

I've got t3 camber tops, but am yet to fit them as i need coil overs...

Maybe i should just order the t3 coil over kits and take the risk of them f00king it again

They want 260 shipped to my door... by the look of it, it comes with a spring aswel

Cheers,
jase