Results 1 to 11 of 11

Thread: Unusual UNI JOINT on W50 BOX???

  1. #1
    Normally Aspirated Domestic Engineer RT104GT's Avatar
    Join Date
    Jul 2006
    Location
    Victoria
    Posts
    733

    Default Unusual UNI JOINT on W50 BOX???

    This is the uni connecting joint on the back of a JDM imported P51 33111-20091.

    Anyone have any ideas what nice gearbox this came off and since when have they been using RUBBER universal joints?



    I am told celica GTV??

    Last of the P51's used late 1979/80?
    Last edited by RT104GT; 17-10-2006 at 12:21 PM.
    1968 RT40S Corona 1600S series II (restore in progress)
    1973 RT104-MQFG 012604 Corona GT JDM (Owned since 1976 242000 km)
    1989 ST185-BLMVZ-0007199 Celica GT4 JDM (unmolested classic 95000 km)
    2012 ZN-6 86GT (shed find 5000 km in 6 years)

  2. #2
    jzx100 fan boy Domestic Engineer slide86's Avatar
    Join Date
    Nov 2005
    Location
    south australia
    Posts
    680

    Default Re: Unusual UNI JOINT on W50 BOX???

    commodores have them
    Quote Originally Posted by The Witzl
    Please visit here, they will have all the answers you need for this "conversion" - www.hot4s.com.au

  3. #3
    Normally Aspirated Domestic Engineer RT104GT's Avatar
    Join Date
    Jul 2006
    Location
    Victoria
    Posts
    733

    Default Re: Unusual UNI JOINT on W50 BOX???

    Quote Originally Posted by slide86
    commodores have them

    SO much for a good gearbox.
    1968 RT40S Corona 1600S series II (restore in progress)
    1973 RT104-MQFG 012604 Corona GT JDM (Owned since 1976 242000 km)
    1989 ST185-BLMVZ-0007199 Celica GT4 JDM (unmolested classic 95000 km)
    2012 ZN-6 86GT (shed find 5000 km in 6 years)

  4. #4
    Junior Member Too Much Toyota
    Join Date
    Sep 2005
    Location
    Qld
    Posts
    5,590

    Default Re: Unusual UNI JOINT on W50 BOX???

    commodore = opel = german = porsch?

    :-)

    seriously: would the rubber would last longer than non-repairable uni joint? or not?
    ------------------------------
    ST185 road barge / MZ11 forest barge / RA65 garage barge

  5. #5
    Junior Member Automotive Encyclopaedia
    Join Date
    Dec 2005
    Location
    Tallahassee, FL USofA
    Posts
    1,115

    Default Re: Unusual UNI JOINT on W50 BOX???

    Where do they use rubber u-joints?
    Metalastik/Rotoflex or rubber donuts are on BMW's, Alfa's, Lotus Elan half-shafts, Mini's inboard joint & lots more.
    A lot cheaper then a sliding spline if there isn't too much range, but the Elan had a 'driving a bungee cord' feel with
    the soft original design.

  6. #6
    i 8 a p00 Carport Converter rob's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    1,852

    Default Re: Unusual UNI JOINT on W50 BOX???

    thats probably not original, i bet the wrecker just grabed whatever to stop the oil from leaking out

    likely from a JAZ80
    - ma61 + 2jz-gte + v160 + 3.5 torsen

  7. #7
    Normally Aspirated Domestic Engineer RT104GT's Avatar
    Join Date
    Jul 2006
    Location
    Victoria
    Posts
    733

    Default Re: Unusual UNI JOINT on W50 BOX???

    Quote Originally Posted by thechuckster
    commodore = opel = german = porsch?

    :-)

    seriously: would the rubber would last longer than non-repairable uni joint? or not?

    yeah well you were right about the porsche, at least int he gearbox Syncromesh system inside it.
    Turns out instead of pulling this apart to wreck and fit a P51 inside it, there already is a P51 inside it.
    Talk about good luck and a find on eBay all for $140 bucks.
    1968 RT40S Corona 1600S series II (restore in progress)
    1973 RT104-MQFG 012604 Corona GT JDM (Owned since 1976 242000 km)
    1989 ST185-BLMVZ-0007199 Celica GT4 JDM (unmolested classic 95000 km)
    2012 ZN-6 86GT (shed find 5000 km in 6 years)

  8. #8
    Normally Aspirated Domestic Engineer RT104GT's Avatar
    Join Date
    Jul 2006
    Location
    Victoria
    Posts
    733

    Default Re: Unusual UNI JOINT on W50 BOX???

    Quote Originally Posted by RT104GT
    SO much for a good gearbox.
    So much for a big mouth and jumping to a conclussion.
    Shit to think I was about the swap this for a wrecked W50 tomorrow?

    it is a Pristine P51 gearbox serial number 7126130.

    The cluster was 7051251 also P51.

    My W50 is 5111190.

    A NZ guy tells me
    W50's begin with a 5
    P51's a 7

    I am waiting for river to pull his finger out and read off his serial number.
    1968 RT40S Corona 1600S series II (restore in progress)
    1973 RT104-MQFG 012604 Corona GT JDM (Owned since 1976 242000 km)
    1989 ST185-BLMVZ-0007199 Celica GT4 JDM (unmolested classic 95000 km)
    2012 ZN-6 86GT (shed find 5000 km in 6 years)

  9. #9
    Normally Aspirated Domestic Engineer RT104GT's Avatar
    Join Date
    Jul 2006
    Location
    Victoria
    Posts
    733

    Default Re: Unusual UNI JOINT on W50 BOX???

    Quote Originally Posted by thechuckster
    commodore = opel = german = porsch?

    :-)

    seriously: would the rubber would last longer than non-repairable uni joint? or not?

    You were right PORSCHE. How did you know?

    1968 RT40S Corona 1600S series II (restore in progress)
    1973 RT104-MQFG 012604 Corona GT JDM (Owned since 1976 242000 km)
    1989 ST185-BLMVZ-0007199 Celica GT4 JDM (unmolested classic 95000 km)
    2012 ZN-6 86GT (shed find 5000 km in 6 years)

  10. #10
    Car Butcher Carport Converter WDE_BDY's Avatar
    Join Date
    Nov 2005
    Location
    New Zealand
    Posts
    1,879

    Default Re: Unusual UNI JOINT on W50 BOX???

    That style of joint was also used in my TA63 with W55 and IRS, however the RA63 I looked at had a proper universal.

    Callum

  11. #11
    Normally Aspirated Domestic Engineer RT104GT's Avatar
    Join Date
    Jul 2006
    Location
    Victoria
    Posts
    733

    Default Re: Unusual UNI JOINT on W50 BOX???

    Quote Originally Posted by WDE_BDY
    That style of joint was also used in my TA63 with W55 and IRS, however the RA63 I looked at had a proper universal.

    Callum

    Thanks Callum, turns out the box is a P51from a GTV Celica??
    Last edited by RT104GT; 22-10-2006 at 08:32 AM.
    1968 RT40S Corona 1600S series II (restore in progress)
    1973 RT104-MQFG 012604 Corona GT JDM (Owned since 1976 242000 km)
    1989 ST185-BLMVZ-0007199 Celica GT4 JDM (unmolested classic 95000 km)
    2012 ZN-6 86GT (shed find 5000 km in 6 years)

Similar Threads

  1. W50 vs W58 - need info to do the swap on my RA28
    By The Witzl in forum Tech and Conversions
    Replies: 33
    Last Post: 13-04-2014, 09:53 AM
  2. L40 gearbox swapped for W50?
    By WDE_BDY in forum Tech and Conversions
    Replies: 2
    Last Post: 21-02-2006, 11:47 AM
  3. W50 into RT81
    By gianttomato in forum Tech and Conversions
    Replies: 2
    Last Post: 17-12-2005, 01:29 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •