w55 help

[kugzs]

http://img157.imageshack.us/img157/4663/zzzzhl4.jpg

how do these clip together?

thanks

[ViPeR_NiPPleX]

fit the fork to the bellhousing first. then slide the thrust bearing over the shaft. slide the clips onto the tags of the thrust bearing so the bearing and fork are locked together.

[ViPeR_NiPPleX]

http://www.cygnusx1.net/Supra/Librar...ion=CL&Page=11

bit more info on it

[kugzs]

Is this how the clip is meant to go on?
http://img219.imageshack.us/img219/49/yyypp3.jpg

Thanks

[ViPeR_NiPPleX]

in that pic, flip the clip around horizontally and you have it ( i think! )

[kugzs]

cheers vn.

anyone able to confirm?

[Adash=P]

In the first pic, the clip on the left is the wrong way around (should be like the one of the right). Like ^ ^ ^ said, flip and should be fine. Then put the fork and check to make sure it won't come off.

[LeeRoy]

In the first pic you literally just need to turb the bearing round and slide it on the fork and thats how it goes. All the clips appear to be round the right way and youll be able to see which side of the bearing it meant to interface with the pressure plate.

- LeeRoy

[kugzs]

okay just want to double check that the bearing and fork are the right way around.

http://img182.imageshack.us/img182/3...bearingsr2.jpg

thanks

[Ta2272]

looks fine by me, just make sure the fork is clipped onto the nipple pivot point properly.

[LeeRoy]

Yeh looks good Kugs, you just need to slide the bearing onto the shaft properly and apply a little grease to keep its movement unhindered.

- LeeRoy