How do you retrofit a 22re comp/loom to an 18rg???

[DQIKST]

cams/pistions are like arseholes be different champ

N/A 13B with a race bridgeport FTW

that would swing some heads just make sure you get a pre 74 model 13B so if you get done by the epa you can whack on the standered exhaust tow it down pass ten go home and install your other xzorts

DQIKST

[o_man_ra23]

cams/pistions are like arseholes be different champ

N/A 13B with a race bridgeport FTW

that would swing some heads just make sure you get a pre 74 model 13B so if you get done by the epa you can whack on the standered exhaust tow it down pass ten go home and install your other xzorts

DQIKST

Thats been done plenty of times too mate, check out your back issues of Fast Fours, and FF&R, theres been a number of 13B TA22s over the years, including recently Tim Frost's 4S FED

Cheers, Owen

[DQIKST]

Thats been done plenty of times too mate, check out your back issues of Fast Fours, and FF&R, theres been a number of 13B TA22s over the years, including recently Tim Frost's 4S FED

Cheers, Owen

today there is

tims 4S FED
toy rotor off the old forums which is getting a 1JZ in it
buztoy off this forum

if you can direct me to a link with heaps of pictures and info it would be sweet O MAN

DQIKST

[tricky]

Not too many people have gone with beams motors yet, or 3SGTE, but then again, they have nothing to prove , everybody already knows they are the McShizzle.

Cheers, Owen

Just you wait... BEAMS is the long term project... Probably into a TA22 with plenty of old skool japness!